Supra_Scott

Thanks for that! There is a similar NA-T kit to mine for sale at the moment on this forum! price is a bit high tho but you saw the results for yourself today!

I have just dug out the reciept for the brake refurb and my old MOT's. It seems the brakes have done LESS than 12k Miles since the refurb, the car is garaged and rarely sees rain/snow.

I went down the NA-T route in May 2009, it totally transformed the car, i've still got it now and wouldnt part with it for love nor money. I have a similar set up to the one 'dangerous' is selling, T70 tubo, fmic etc and it made 374BHP and 404Nm torque at just 6psi boost! A decent mechanic could have it fitted in a weekend but make sure you get an ECU and have it mapped properly before you attempt to drive it on boost! GLWS!

I too had a great day, it was good to finally put faces/cars to names. Nice set up at Dynodaze, after todays meet I'm sure you'll be seeing most of us again! Pretty happy with my results 374BHP and 404Nm torque. Not bad for £1200 of bits bolted onto my 224BHP n/a engine! Gutted I mist Dunk's run, but I did enjoy a blast to Bewdley on the bike for a drink and ice cream by the river A big thanks to Kamal and the lads at Dynodaze for making this morning happen!

I have for sale my front UK calipers and 3G RS-10 grooved and dimpled disc's. The calipers have only covered a few thousand miles since i had them refurbished (will check reciept date and MOT's for more precise milage) and i purchased the disc's at the same time. The disc's alone are £254.40 on the Whifbitz website. The calipers were stripped and painted matt black when refurbished, they are now painted red with hammerite spray paint. There is plenty of meat on the pads. The brakes are off the car and ready to go. I am going to the Dyno day this Sunday at DynoDaze so could bring the brakes with me. I'm looking for £450 collected (P&P at buyers expense due to weight). Now £420 collected Now £400 collected! I'm going to Jap Fest @ Castle Combe this Sat so can take the brakes with me if needed.[/-][-] SOLD! Pic's Added I am selling due too now having a new 6-Pot set up. Any more questions please ask. I've not got around to taking any pic's yet as i'm sure we all know what UK brakes look like.

Corley services if fine by me Dunk, what time you thinknig? Any other takers?

Thanks for adding me to the list Dunk, although my login name is spelt incorrectly! Are there any planned meeting points along the way, or are we all just meeting there at 9am? I'm not far from J5 M6 so probably going M6, A444 route.

Have you got any pic's of your car with the wheels fitted? I have the TRD front end and rolled rear arches, would be interested to see how they look as i'm on 20's at the moment, i'm after some smaller wheels for driveability but don't know if 18's would be swallowed by the arches. Thanks.

I used a pair of 'Ring' angel eye units from Halfords when i had my Bomex front. The fogs were effective when on but the angel eyes looked poor. £80 and they come with brackets, wiring, relays and switches. If i remember i ended up modifying the bracked to fit the bumper. Similar to these on fleabay: http://cgi.ebay.co.uk/Ring-LED-Angel-Eye-Driving-Lamps-E-Approved-Pair-New_W0QQitemZ300521524156QQcategoryZ28645QQcmdZViewItemQQ_trksidZp4340.m263QQ_trkparmsZalgo%3DSIC%26its%3DI%252BC%26itu%3DUCI%252BIA%252BUA%252BFICS%252BUFI%26otn%3D15%26pmod%3D290525152034%26ps%3D63%26clkid%3D6823969009348906086

Thanks, i'll get on the phone in the morning.

Good shout mate, well worth doing and keeping an eye on the line.

While out last night for a drive in my Supra i had a bit of a surprise. While going round an island at 30mph i heard a noise of which i can only describe as what sounded like a house brick bouncing underneath the chassis of my car. I pulled over expecting the worst like a wheel hanging off or something, but all seemed ok. I took a look at the island to find the outer ring of my crank pulley in the middle of the road. The crank pulley had de-laminated and the outer (aux belt drive) came off. Thinking about it in recent weeks there has been a bit of belt squeal on start up which went after a few seconds, and also squeal when maneuvering i.e. parking the car. I dismissed it due to the weather etc but realistically it was an early warning. It could have been a lot worse I know. My 1995 NA has 120,000miles on the clock and has been NA-T for the past 18months/8,000miles. I urge anyone who hears similar noises under the bonnet or has high mileage to get this checked out as it could be very costly. One of the lads on the Lexus forum found out the hard way as the pulley took out the PAS and Air Con pumps too.

I just wondered if anyone has a new or nearly new crank pulley, as mine has de-laminated and the outer (aux belt drive) came off last night while driving at approx 30mph. Could have been a lot worse. Thanks.

Hi, is this still availiable? I have a Seibon TRD style Carbon bonnet, any idea if that would clear the alloy rad? Thanks, Scott

Any news on this? Did they get back to you about the heater vents and water drainage?

No problem. Thanks.

Is this still availiable or did you complete the sale?

I'm running an Emanage Blue on my NA-T and it does the job nicely. If i had the funds i would look into a stand alone unit, but you'd need to budget over £1k. I've been reliably informed the blue is good for upto 440BHP as long as everything else is up to the job. Had mine on for 18 months and i'm running around 380BHP with no issues Good luck tracking one down!

Found it The lads on the Scion forum have done a 'how to' for the cable and posted a link to download the software from. May be worth a try as a backup plan. Good Luck! http://www.scionlife.com/forums/showthread.php?t=118903

Yes mate, it was you who kindly bailed me out when i needed the cable. I did find on a forum somewhere the instructions to make your own using a Nokia phone to PC cable. Might be worth a try?! Did you put your NA-t back on the road Kieren?

I did have the software mate, but somone off here borrowed it off me along with wiring diagrams and e-manage manual and have yet to return it Sorry i can't return the favour!

If your on about the sensors in the manifold then i have a pair in good condition. Only taken off due to going NA-T and Greddy engine management. PM if interested.

Thanks for organising this, it don't sound like a bad offer. Have you got or seen a set of their 'Luxury Tailored' mats? If so how do they compare in quality to the 'Pure Sports' mats? My 'Pure Sports' mats have seen better days but i haven't yet found anything up to the job of replacing them without achieving that dreaded just purchased from Halfords look! lol. Do they come with the hole in the drivers side mat for the origional fixing?

Yeah sounds like the 1st CAT pipe then. Speak to neo in that case as i've only got the manifolds. Good luck getting it fixed.

I've already sold the standard cat but have the origional manifolds if needed. PM me when you've checked.