hodge

Well it looked like its just gona get sold then.Thanks for the help JohnA.

my only concern is that, if I put 95 ron petrol in it may have a detremental effect on the engine and damage it. And also a reduction it performance.

I would say about 29 or 30 psi mate.

Does anyone know anything about these. I bought it a year ago but have never fitted it. Have I been riped off. Do they really work? Apparently you can use normal unleaded petrol and the octane booster in the unit acts as an addative. Ive put it up for sale on ebay but if any of you have had experience of these really working then ill end the auction and have it fitted.

I took mine off last year and have had no problems at all. my paint hasnt faded the only difference is that my blow off valve sounds like a gun going off it so loud. I picked my son up from nursery and when I backed off the throttle a woman ducked and covered her head think she thought she was getting shot at. Couldnt stop laughing all the was home.

Have you extended the remote cable aswell.

Has anyone put a Greddy E01 controller screen in the rooflining. Ive done a search and seen some apexi fitted was wondering if anyone had any pics of the E01 in there. Only problem is i will have to extend the screen cables and the remote wire, but I suppose if I just get the right gauge of wire it wont be rocket science.

Id have the motor at the right price when you come to sell it mines packed up.

You've got dust between your pads and the discs. take out the pads and remove dust. Make sure there totally clean and replaced perfectly or it will just happen again. I know what you mean about the squeaking though its anoying as hell.

I aint got a switch at all they are quite useful I had an Impreza before my Supra and I used them all the time. They were wired up to my full closure alarm so when the alarm was turned on they folded in was well cool.

Thats great simon thanks do you by any change know the RPM offsets and duties I should use for stock turbos

I wasnt sure if the cars had a couple of doors or new mirrors or something dont think so but just wanted to run it past you guys.

Do all Jspec supras have fold in mirrors as mine doesnt and there is no switch on the dash for it. Its just that I thought all jap import cars did.

Come on guys dont let me down im totally stuck here.

Can anyone give me the Rpm offsets and duty for my E01. the car is a 1994 Jspec with stock turbos.

I know why ive use a pulse for the FCD its because the info I got from Simon said I used the blue and green wires on the diagram so stupid me used the these colours instead of sorting the correct input and output. So anyway I can use for the FCD I use anolog input 2 and anolog output what settings would I need to raise the fuel cut. Ive got speed sensor for 1 pulse what would be best for the other pulse and anolog 1.

Can any of you help. Ive connected up my E01 with the external signal harness and I could do with some of the settings for the signals. Ive got anolog input 1 as throttle pos (settings are 0%=0.52v / 100%=3.72v Anolog signal input 2 - Oil temp I need volt range and conversion. Anolog signal output, im using as a FCD with the pulse signal input 1 but I need the pulse signal units, and other setting fir the FCD to work because when I connected it all together the car was starved of fuel and had problems ticking over. And finally pulse signal input 2 - Speed sensor. Id apreciate any help you can give me.

Anybody know how much these restrictor rings are.

Is the hybrid GT a good kit for you money then

I emailed the guy about this intercooler and he seems to think that the power increase would be between 30 - 55bhp. Does this sound realistic.

I want to remove both cats on my j spec. The car has an eloctronic boost controller so do I still need a resistor ring or can I control the boost ok with the boost controller.

Ive just ordered a union bolt, gasket and o ring from Hodgson Toyota in Gateshead they cost me nearly £35 for the lot hopfully theyll be here by wednesday.

That sounds more like it. Thanks for the help Paul ill give Toyota a ring tomorrow and get a price for the bits. Cheers.

Is this the only way fo doing this. Ive read something on the forum about a lexus splitter connector or something that branches from the oragional oil sensor.

Can anyone give me a pic of where an oil pressure sensor would go. I just bought a pillar pod and a couple of gauges and looking to fit them this weekend. Also do I need to buy and adaptors or anything. Cheers