Batmax Posted February 11, 2014 Author Share Posted February 11, 2014 Yes I have Goodridge Stainless Steel Brake + Brembo Spec Hawk Pad front and rear, the supra stops but make me the sensation that will not stop and I don't like that feel I like to put the feet on pedal brake and the car respond immediately Link to comment Share on other sites More sharing options...
dan294 Posted February 11, 2014 Share Posted February 11, 2014 Stoptech are worth a look as well. I have front and rear Stoptech brakes on my M5, with braided lines. They're a million times better than the standard brakes on an E39 M5. Link to comment Share on other sites More sharing options...
Brazil Posted February 12, 2014 Share Posted February 12, 2014 The only 100% sure test is to try your rims on a car with these exact same brakes, or vice versa, if clearance looks to be potentially tight. AP have a template for their JZA80 kit, not sure about Alcon, but if you are working to a few mm, using a cardboard template may not be accurate enough Chris, Do you have a pad that would fit on my Endless set up? I too am not too happy with how fast or interaction I get from my breaks could this be the servo or the pads that came with the kit do you think? FYI I have full kit front and rear huge 14.2'' discs. Link to comment Share on other sites More sharing options...
Chris Wilson Posted February 12, 2014 Share Posted February 12, 2014 I would need a link to a page showing a pad outline and dimensions, or draw the outline of the pad and sketch in dimensions and what area the friction material occupies. I may be able to do them, but need more info please. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now