T2 MSW Posted February 9, 2015 Author Share Posted February 9, 2015 yes it's on the correct CAL. Last selectable one as the others are disabled. Link to comment Share on other sites More sharing options...
Chris Bailey Posted February 9, 2015 Share Posted February 9, 2015 yes it's on the correct CAL. Last selectable one as the others are disabled. Have you got a laptop with the Syvecs software on it where you can look at the logs etc? Failing that maybe try get hold of Ryan and see if he can have a look at it for you. Link to comment Share on other sites More sharing options...
C12MMO Posted February 19, 2015 Share Posted February 19, 2015 really? You will have to fire it over to me I'm a technology retard and managed to record 48 seconds in the open pit lane and that was all I recorded all day. Absolutely gutted as I would of had some great footage. Link to comment Share on other sites More sharing options...
T2 MSW Posted February 20, 2015 Author Share Posted February 20, 2015 I'm a technology retard and managed to record 48 seconds in the open pit lane and that was all I recorded all day. Absolutely gutted as I would of had some great footage. Aww no way. Get that posted up anyways Link to comment Share on other sites More sharing options...
supra matt Posted February 23, 2015 Share Posted February 23, 2015 Any more updates on this mate how did the rear lights come out Link to comment Share on other sites More sharing options...
T2 MSW Posted February 28, 2015 Author Share Posted February 28, 2015 Great service from Toyota. Ordered the rad shrouds on Thursday, got a call today that they were ready for collection. So picked them up this afternoon. This morning the car went off to the body shop which is about 45 mins drive away. Im having the damage on the skirt repaired and new doors put on that have door handles as the blended look is great but for track day use its just plain dangerous. Should have it back in a couple of weeks. Car drove all the way there and even got stuck in traffic, now Ive gone back to the stock fan setup it didn't overheat once and thats without the shroud on. May get on with the rear lights tomorrow or next weekend so they are ready for when the car comes back. Link to comment Share on other sites More sharing options...
T2 MSW Posted March 6, 2015 Author Share Posted March 6, 2015 Ordered myself a set of LUKE harnesses today. 6point but I went with the road/trackday versions and not the FIA approved as I won't need approval and more likely to want them to get through a MOT - which these do. Also ordered a NGR Harness bar so they are not mounted from the rear seat belt points as thats too low. With this bar in a have the option of leaving the stock seatbelts in, but ill prob remove them. Cant wait to get the car back from the body shop now. Can then get the below list sorted 1) Fit rad shroud 2) Fit new speed sensor which should mean I don't have to use the SatNav for a speedo 3) Fit harnesses 4) Sort out washer bottle so it actually works. Link to comment Share on other sites More sharing options...
T2 MSW Posted March 23, 2015 Author Share Posted March 23, 2015 Quick little update. Rad shroud is now all fitted and car stays at correct temp now Unfortuantely looks like the ignitors gone so whilst I wait for a new one of those I've got on with installing the harness bar tonight. Link to comment Share on other sites More sharing options...
T2 MSW Posted March 23, 2015 Author Share Posted March 23, 2015 Does anyone know what the thread and pitch of the seat belt bolt holes are at the floor level. One on the B pillar and one on the transmission tunnel? Link to comment Share on other sites More sharing options...
supra matt Posted March 23, 2015 Share Posted March 23, 2015 I believe there 7/16 unf Link to comment Share on other sites More sharing options...
T2 MSW Posted March 23, 2015 Author Share Posted March 23, 2015 I believe there 7/16 unf On both sides? what an odd size Link to comment Share on other sites More sharing options...
supra matt Posted March 23, 2015 Share Posted March 23, 2015 http://www.mkivsupra.net/vbb/showthread.php?t=172147 Yes I was right hear you go mate Link to comment Share on other sites More sharing options...
T2 MSW Posted March 23, 2015 Author Share Posted March 23, 2015 perfect thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now