Noz Posted March 25, 2013 Share Posted March 25, 2013 I have MT stress radials on a set of 17's. Will these be ok for an MOT? They are within the use line. May sound silly but I've never thought about it. I would assume they would be ok, but want to ask people with more experience. Thanks Link to comment Share on other sites More sharing options...
adam1983 Posted March 25, 2013 Share Posted March 25, 2013 So long as they are street legal and within the 1.6mm limit then I can't see an issue Link to comment Share on other sites More sharing options...
dr_jekyll Posted March 25, 2013 Share Posted March 25, 2013 should be ok, ive motd cars with race wets that clearly say competition use only on them but knowbody seems to notice lol Link to comment Share on other sites More sharing options...
Westy Posted March 25, 2013 Share Posted March 25, 2013 Technically no as they are not e marked, but as sated above I'm sure they will be fine! Link to comment Share on other sites More sharing options...
Ian C Posted March 25, 2013 Share Posted March 25, 2013 Isn't the limit 2mm these days? Across 75% of the tyre width minimum? Link to comment Share on other sites More sharing options...
adam1983 Posted March 25, 2013 Share Posted March 25, 2013 Technically no as they are not e marked, but as sated above I'm sure they will be fine! I thought they were mate. If that's the case then I suppose it depends where you take it. MOT seems to be getting more strict by the year though. Link to comment Share on other sites More sharing options...
dr_jekyll Posted March 25, 2013 Share Posted March 25, 2013 1.6mm over 75% Link to comment Share on other sites More sharing options...
adam1983 Posted March 25, 2013 Share Posted March 25, 2013 Isn't the limit 2mm these days? Across 75% of the tyre width minimum? Is that a recent change? I always thought it was 1.6 Link to comment Share on other sites More sharing options...
Benjy Posted March 25, 2013 Share Posted March 25, 2013 1.6mm over 75% This. But it has to be the centre 75% of the tyre too. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now