Nodalmighty Posted February 21, 2013 Share Posted February 21, 2013 Basically, I have Supra Envy over a customers car and would like to copy the look of his Supra. I don;t like the wide rear look but the wide front and bumper looks bloody sweet as on it's own. Where would be the best place to get only the front bits from? I can then run 18" x 10" TTE rims all round Lyndon. Link to comment Share on other sites More sharing options...
Supra Gaz Posted February 21, 2013 Share Posted February 21, 2013 Knight racer do them, who knows what fitment is like though Link to comment Share on other sites More sharing options...
hodge Posted February 21, 2013 Share Posted February 21, 2013 I'm sure knight racer do a front kit with wings and bumper and yes you can run 18 x 10 all round. Link to comment Share on other sites More sharing options...
Nodalmighty Posted February 21, 2013 Author Share Posted February 21, 2013 This is a race car so fit is less important than function. I'll give them a look see. Lyndon. Link to comment Share on other sites More sharing options...
Dnk Posted February 21, 2013 Share Posted February 21, 2013 This is a race car so fit is less important than function. I'll give them a look see. Lyndon. If its a race car i'd leave it stock Link to comment Share on other sites More sharing options...
Wez Posted February 21, 2013 Share Posted February 21, 2013 If its a race car i'd leave it stock Link to comment Share on other sites More sharing options...
Nodalmighty Posted February 21, 2013 Author Share Posted February 21, 2013 Can I run a 10" wide TTE wheel under the stock front wing (Roll the arch) ? Has anyone got a set of 10" tte rears going? Lyndon. Link to comment Share on other sites More sharing options...
Dnk Posted February 21, 2013 Share Posted February 21, 2013 Why not just run the staggered set up, 9's and 10's work well Link to comment Share on other sites More sharing options...
Gaz6002 Posted February 21, 2013 Share Posted February 21, 2013 If its a race car i'd leave it stock I think he means more 'race car look' than actual race car. Properly racing a car covered in fibreglass bodykit is a recipe for financial ruin. Link to comment Share on other sites More sharing options...
Dnk Posted February 21, 2013 Share Posted February 21, 2013 This is a race car so fit is less important than function. I'll give them a look see. Lyndon. Link to comment Share on other sites More sharing options...
Wez Posted February 21, 2013 Share Posted February 21, 2013 Can I run a 10" wide TTE wheel under the stock front wing (Roll the arch) ? 10" front wheels on race car Wont that seriously overwhelm the power steering, I know even with stock sized wheels and sticky rubber it gets put through its paces, ive boiled mine over a few times Link to comment Share on other sites More sharing options...
Dnk Posted February 21, 2013 Share Posted February 21, 2013 Fitting a decent cooler for the p/s would be a must as the stock one is not very good to say the least Link to comment Share on other sites More sharing options...
DodgyRog Posted February 21, 2013 Share Posted February 21, 2013 You could get lucky like I did and get one never fitted but 2nd hand if you get what I mean Link to comment Share on other sites More sharing options...
pedrosixfour Posted February 21, 2013 Share Posted February 21, 2013 (edited) As the lads have said, fitting large chunks of fibreglass to a track car will be something you'll regret. Metal & rubber, they are your friends. What offset are the 10" TTE rims? Anywhere between +40 & +50 I'd say you can run them with a stock front arch (albeit rolled). Edited February 21, 2013 by pedrosixfour (see edit history) Link to comment Share on other sites More sharing options...
James Posted February 21, 2013 Share Posted February 21, 2013 The CCW Classic set up for the Supra has a 10J front wheel, normally with a 285/30 tyre. I believe the offset of those is around +50 so if the TTE are close to that then you may get away with it Link to comment Share on other sites More sharing options...
ellis Posted February 21, 2013 Share Posted February 21, 2013 I've been looking for the bumper and wings too and, sadly, it's pretty much limited to KR or spending far too much getting them from the U.S. KR is not an option for me. Link to comment Share on other sites More sharing options...
Nodalmighty Posted February 21, 2013 Author Share Posted February 21, 2013 I have a Mocal cooler for the PS. But with a Rad, Oil cooler, Autobox cooler (Both 235mm by 25 row) and PS cooler and Two Intercoolers the front is going to be a bit crowded. I'll stick with stock and just put my ebay lip on the front bumper as originally planned then. Lyndon. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now