supradibbs Posted April 19, 2005 Share Posted April 19, 2005 what do u guys think should i mesh the front or not???? Link to comment Share on other sites More sharing options...
D3xt3r Posted April 19, 2005 Share Posted April 19, 2005 No mesh means better flow to the IC but higher chance of it getting killed by a stone.. So I say NO MESH! Link to comment Share on other sites More sharing options...
sideshowbob Posted April 19, 2005 Share Posted April 19, 2005 Wouldn't the mesh basically form as a 'flat panel' at speed, therefore restricting the airflow? Looks the bizz though mate! Link to comment Share on other sites More sharing options...
Elliot Posted April 19, 2005 Share Posted April 19, 2005 I could never quite figure out how it would make much difference having mesh there in regards to the intercooler. Does it form a 'flat panel' as sideshowbob said, or would the air still flow past the mesh? Link to comment Share on other sites More sharing options...
Sharpie Posted April 19, 2005 Share Posted April 19, 2005 No mesh, looks sweet as is Link to comment Share on other sites More sharing options...
Trig Posted April 19, 2005 Share Posted April 19, 2005 Im sure dude has meshed his so cant be that restrictive. I say mesh it. doesnt look right with the sides meshed and not the front. Link to comment Share on other sites More sharing options...
neilg Posted April 19, 2005 Share Posted April 19, 2005 Dont do it mate, i havnt, looks miles better without Link to comment Share on other sites More sharing options...
Muffleman Posted April 19, 2005 Share Posted April 19, 2005 Have to agree it looks better without, but how annoyed would you be if it got damaged. Vanity - no mesh it looks cool. Sanity - mesh it, IC's aren't cheap and bent fins wont help performance. Link to comment Share on other sites More sharing options...
supradibbs Posted April 19, 2005 Author Share Posted April 19, 2005 Have to agree it looks better without, but how annoyed would you be if it got damaged. Vanity - no mesh it looks cool. Sanity - mesh it, IC's aren't cheap and bent fins wont help performance. yeah all true but the be efficent would need to be a quite open mesh therefore how much better protected would it be????? Link to comment Share on other sites More sharing options...
Dragonball Posted April 19, 2005 Share Posted April 19, 2005 Deffo yes - always look much better IMHO Link to comment Share on other sites More sharing options...
Alex Posted April 19, 2005 Share Posted April 19, 2005 Mesh it unless you like replacing FMIC's... Link to comment Share on other sites More sharing options...
supradibbs Posted April 19, 2005 Author Share Posted April 19, 2005 ok if i go the mesh route where can i buy some quite open mesh as the one in the picture i think is too small Link to comment Share on other sites More sharing options...
Alex Posted April 19, 2005 Share Posted April 19, 2005 http://www.expandedmetalcompany.co.uk/ or B&Q (they do actually have a good range ) Link to comment Share on other sites More sharing options...
Dragonball Posted April 19, 2005 Share Posted April 19, 2005 Have you seen the stuff that dude recommends - the S/S stuff for Jags etc? Well I am getting in about 1.2 x 3 sq metres of the slightly smaller sized mesh - about 6/7mm across - cut on the diamond It comes in mega expensive if purchased individually 9"x38" = £67.50 I think - but if I get it in like this then it should be about £40 only (inc a drink in it for us) But will need collecting I fear Link to comment Share on other sites More sharing options...
supradibbs Posted April 19, 2005 Author Share Posted April 19, 2005 Have you seen the stuff that dude recommends - the S/S stuff for Jags etc? Well I am getting in about 1.2 x 3 sq metres of the slightly smaller sized mesh - about 6/7mm across - cut on the diamond It comes in mega expensive if purchased individually 9"x38" = £67.50 I think - but if I get it in like this then it should be about £40 only (inc a drink in it for us) But will need collecting I fear i may be intrested but as i say it has to have a large dimond to it would prefer stainless if poss Found some real nice stuff the st24 mesh and the one they use on the mgf but stupid expensive and dont even do a sheet big enough to mesh a t/s bumper Link to comment Share on other sites More sharing options...
SimonB Posted April 19, 2005 Share Posted April 19, 2005 i may be intrested but as i say it has to have a large dimond to it would prefer stainless if poss Found some real nice stuff the st24 mesh and the one they use on the mgf but stupid expensive and dont even do a sheet big enough to mesh a t/s bumper You mean this stuff? 40x12" not enough for you? I just bought some, it should be plenty big enough I would have thought. Link to comment Share on other sites More sharing options...
supradibbs Posted April 19, 2005 Author Share Posted April 19, 2005 You mean this stuff? 40x12" not enough for you? I just bought some, it should be plenty big enough I would have thought. yeah thats the stuff but look at the bloody price :eek2: Link to comment Share on other sites More sharing options...
LeeT Posted April 19, 2005 Share Posted April 19, 2005 mesh it, you'll be gutted if that gets damaged http://hometown.aol.co.uk/LEE2SARE/intercooler3.JPG Link to comment Share on other sites More sharing options...
supradibbs Posted April 19, 2005 Author Share Posted April 19, 2005 mesh it, you'll be gutted if that gets damaged http://hometown.aol.co.uk/LEE2SARE/intercooler3.JPG what mesh is that?? Link to comment Share on other sites More sharing options...
Dragonball Posted April 19, 2005 Share Posted April 19, 2005 Thats the stuff...! And basically this is coming in at over £100 a sq metre - cost! What size do you require to fit? From memory I think it is approx 30cms x 120 cms inc overlap? Link to comment Share on other sites More sharing options...
supradibbs Posted April 19, 2005 Author Share Posted April 19, 2005 Paul the pic that Leett posted the stuff u can get that looks the nutts,is it stainless???? the sizes i need including over lap are........ 1x 27"x9" 2x 10"x8" 2x 3"x8" Sorry for inches but thats what i work in how quickly can u get it could do with it for the weekend Link to comment Share on other sites More sharing options...
supradibbs Posted April 19, 2005 Author Share Posted April 19, 2005 i make that 160x23ish cm ????? any chance of a pic Link to comment Share on other sites More sharing options...
dude Posted April 19, 2005 Share Posted April 19, 2005 The stuff Pauls got is what you want and it actually changes size because it isnt welded so too speak , it concertinas !!! like an acordian !! Dude and hes selling at cost !!! Link to comment Share on other sites More sharing options...
supradibbs Posted April 19, 2005 Author Share Posted April 19, 2005 cool cheers dude its the time scale thing mate really need it by weekend Link to comment Share on other sites More sharing options...
Bobbeh Posted April 19, 2005 Share Posted April 19, 2005 No mesh, looks sweet as is What he said. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now