MONKEYmark

lol thats me who filmed that run at rotostock event was a good day and the track looked great set up

high miler record or what Odometer: 740000 miles

i still got that set up for super nintendo with doctor and a n64 with doctor

i been off for about 25 days and 1st day back in morning.doing 3x 12 hour shifts then i got 7 days off dreding going in at 630am

my car is a jap netto spec.came with no lsd.no cruise control,no active spoiler.and have dumped the aircon and rear seats and hi fi and speakers.got UK LSD in now would be good to see chris in a supra. also what about aji lad he does lots of track days.

scan some pics up for all us northerners who cant afford the mag lol. whats so special about the yellow supra

thought you meant in uk.seems a like there are very rare to get them up to that power levels.do you have any pics of the gtr or specs.

someone at our work came in on nights drunk and he fell asleep in his car.he had split up with his g/f and got drunk.some lads shrunk wrapped his whole car so he could not get out.bosses were not too pleased in the morning lol.guy was also sacked

bloody PC brigade or did you mean max power

just been to **** shop for some milk and they had *** power with a yellow supra looked like a mad supra. 4.25 pounds for *** power mag. it allways has to be 1000hp or its not worth getting there cameras out for.

what 1200bhp r34 is that.

what smaller belt you get for removing aircon pump.mate said to get a belt 1833mm i think he said.he was saying it took him 3 belts to get the right one. thanks

lol thats so funny.the cream egg one looks sickly.imagine eating that in 1 sitting.

nice work and good turbo.eyefi got a gt35r with 4" exhaust and downpipe and midpipe.like to see these working projects good luck

just been out doing a bit when i was finished i looked like a coal miner,very dirty job. spent ages doing fuel rail brackets and got them looking like a mirror/chrome finish.nearly done the fuel rail to a mirror/chrome finish.well chuffed with the finish.jake use the dremmel type tool with the round sanding discs and grid down all cast marks and excess ally thats not needed.try sand the area down with smooth sand paper,then it will be easier to polish up with a mop and wax.also the turbo pipes are very pourus.sometimes i have spent way too much time on 1 peice.eg on water outlet pipe i spent ages getting it perfect.when you put all the parts back on car you cant see a lot of polishing.just got to get to a stage where you happy with it. my car been stood ages and started to go all that powder crap on pipes.once its been polished it would only take a quick buff up maybe once a year.

hi mate thanks for pm. if you dont mind getting dirty and spending ages trying to get finish u want give it a try.the fuel rail was easy to do as its a uncomplicated design.the stock fuel rail is another matter with way too many tight areas. shine wont last forever but should stay clean a long time.every now and again give it a quick polish. it would be easier to give to pro`s and come back looking perfect.if you bored and want something to try.just try see if we can help each other out with tips.will update thread with more info i find

3 cars with 3 spokes.looks a good place.

hi i bought the only mop they had in shop,its a bit floppy but did the job ok. last time i bought a polishing kit with taperd spindle,but cant find spindle.still got the older mops they are firm.this grinder u put slightest pressure on and it comes to a halt.dad was saying that clarkes gear is a bit crap.see how long it lasts. Grinder Specs http://www.machinemart.co.uk/product.asp?p=060710038&r=2040&g=106 Grinder Pic http://www.machinemart.co.uk/images/products/hi/MM060710038C.jpg Polishing Mop http://www.machinemart.co.uk/images/products/hi/MM060320120.jpg This 40 fold pure cotton mop is designed to fit most 6" bench grinders and is ideal for polishing copper, steel, brass, nickel, silver and chrome plated products. 6" diameter 11/8" (28.5mm) bore ps got a small 2" taperd mop that i got for using with drill.i thought a drill would not be powerfull enough for prolonged use.

i had one for 10 months but got rid for a supra.nothing went wrong on mine and lectrics were sound.gearbox was a bit notchy

whats wrong with been able to vote BNP.people are made to feel like a racist for voting for the BNP.they are a party same as all the others.think people have had enough of all the crap thses days.all this PC bollox.you cant have a flag of your own country in case you seen as racist.whats wrong with been proud of your country.you would not dream of going to another country and asking them to take ther countrys flag down. if you in another country you have to respect there laws.things like when everybody gets behind the country in wars or sports events showing support. when you see the armed forces doing there job to protect us makes you proud.years ago when neighbours used to look out for each other.now people keep themselves to themselves.too much crime now.also it seems like you work hard for a living only for them to find more ways to get money out of you when been a dodgy fooker you get treated with kid gloves.

further info to update BLING pictures This Is AGood Source For Pics Of Polished Stuff,Even Brake Calipers Loads Of Pics Of Polished + Chromed Parts You Will Need To Be A Supraforums Member To Read This Thread Supraforums Thread On Engine Detail

hi i have just polished my PHR fuel rail today.its a MESSY DIRTY job.but good knowing you done something yourself.Dont think its a quick 2 min job and its all done with. Here are some pics before and after of fuel rail. It took me about 3 hours today.going to spend another hour on it tommorow to get it perfect.Im chuffed it came up so good.I polished fuel rail & had a couple of small pin holes so sanded them out & re polished it. What i used was Clarkes 250 Watt 6" Metalworker Bench Grinder £35 6" Polishing Mop £8 polishing wax (had some from last time i did polishing) fine sandpaper wet and dry (had some from last time i did polishing) safety goggles £5 metal work safety mouth and nose mask £4 pair of thick suade gloves £3 Thats all i used from today.Last time i did polishing i went through 2 bench grinders and 2 mini dremel type tools.The bench grinders are not really up to the job.but you can buy industrial polishers from £150 up to £800. The dremmel type tools are great with the round sander atattchment it works great at getting the cast marks out of pipes.You can use a bench grinder with wire wheel to clean the alloy up. You can get different colour waxes.I used the white wax.Turn grinder on with polishing mop apply some white wax to wheel & hold your alloy against wheel holding part you polishing tight.Dont press alloy too hard agaist the wheel or you will overload motor and burn it out eventually.Keep putting wax on wheel every now and again till you get the finish you want.Dont be afraid to sand down and start again it will come up great if you take your time. I will see how this cheap grinder goes and may look to buy a industrial polisher if it saves on time. Not saying i know anything like the pros,but i think it has turned out great for me,It is a dirty job,but worth it knowing you done something yourself. Things I Have Polished Before water outlet pipe cam covers turbo pipework stock fuel rail (very involving work) blitz alloy induction pipe blitz fmic piping (very soft alloy) cusco strut bars PHR fuel rail (nice easy design for polishing) Things That Need Chroming rad clamps battery clamp power steering tank engine lift out hooks cusco strut bar ends the blue bits can be chromed If you not too fussed about polishing.you can clean the dirty alloy pipes up with a wire brush,or on the grinder i got it had a copper wire brush and sandstone wheel,or you can get a flexible hose to go on drill and buy small copper wire brushes and clean areas,comes up pretty good. Iam not really into show & shine,but was bored and wanted to start doing something.just built a mini micro workshop to potter about in.will try update with items that may help other people if they fancy having a go themselves,hope its of use. Some before & after pics ps the polished fuel rail brackets has 1 bracket polished and 1 is un polished to show the difference.

was keith c sat in a deck chair drinking lager.not sure about you as i dont know.will try find link was a big video.

i was watching a vid of taz going to europe seen it on supraforums.dont forget the progress pics