Jump to content
The mkiv Supra Owners Club

Supra_Nish

Followers
  • Posts

    491
  • Joined

Everything posted by Supra_Nish

  1. Also the t-piece, urm where the hell do u get one and what size etc? Any help appreciated Cheers
  2. Hey peeps, Going to attempt a boost gauge install today. What diameter vac hose do i need? I've searched around, got a fair idea of how to fit it but no idea about the vac hose. Also fitting to a pillar pod, where do i get power for the light from? Thanks for help as always
  3. Yeah either that or your not hitting the pedal hard enough splurge! Search seems to bring up dot 5.1 or 3.1 fluid?
  4. Me too me too! But happpens when i floor it, normally from stand still. Big red triangle and handbrake light, if i ease of it usually goes off. Though once it felt like someone had pulled the handbrake as the car seemed to die when light came on and then carried on. Come on Ian spill the beans...
  5. Just can't get the staff these days! Sorry hijack over
  6. Ian mate could you please get those POC lab servers up and running again plz???!
  7. Paul could you let me know when u get these etc, well tempted to get a set as well!
  8. This silver ECU behind the stereo, is the polished silver box, about 8x8cm? No real markings just plain? Was going to disconnect mine and keep spoiler down permanently but not sure if its the right box! Theres so many boxes back there its unreal?!
  9. Congratulations! Sorry no advice but i'm very interested in peoples opinions now that there are so many people going single and i feel the need for more speed!
  10. ok had a look at all the fuses at in the engine bay - all fine. Tried tracing the wire from the switch but its part of a massive loom and i cant see where it goes. Can anybody save my mirrors?????? Its getting bad i lost a race with a 330ci cos i didnt want to turn into his lane as i couldnt see him cos mirror was pointing down!!!
  11. Just fitted a new alpine stereo to the car, only to find later the electric mirrors aren't working for some reason? Does anyone know if these have a specific fuse i could check/replace? Or any ideas of something i could have knocked loose near the radio? Thanks
  12. Woohoo my first post where i was actually helpful! :nana:
  13. Go to http://www.mkiv.co.nz/ Under specs its got a breakdown of chassis numbers and meanings. HTH
  14. ok being an over excited noob i've managed to fit the filter! Looks right and solid but haven't driven it yet as got hungry Cheers for the offer again heckler, if it blows up on test drive later i'm sure i'll be in contact!
  15. Can i use the airstrip?? I'll confirm with ya tomorrow mate, they're piling the work on now that they know i'm leaving Thanks again
  16. Good ol Army to the rescue! That would be great mate, PM me a time when your free and i can come to you. Cheers
  17. cheers Ian, i know i'm prob being thick and its a small job but a bit worried of pulling bits off i shouldn't be! I assume the stock piping will fit into the filter fine? Can't believe there isn't a noobie grade write up on this somewhere!
  18. Has anyone got pics or detailed instructions on how to fit an apexi induction kit? I have the standard panel in place and theres a whole load of crap there so don't want to pull of the wrong bits! Also, how long am i looking at for fitting time? Can i get it done in an evening after work ordo i have to leave off early with this headache i've got coming on?
  19. Nice one just what i was looking for.
  20. yeah i've heard about this elusive ECU, is it the one apparently behind the stereo? A pic or really good description of the box would be much appreciated, i remember seeing a silver box back there but that was plugged into the back of the stereo!!
  21. Ok peeps does anyone have this document that Pete refers too? The link is dead, and after searching every active spoiler thread seems to end with Pete posting this link. Anyone have an updated link or document? Cheers
  22. Good meeting you guys Unlike you Alex i didn't manage to get the full shade and now have mismatched arms?! Cheers for the quick lookover Ian, PM me about the filter else i'll leg it back to london without paying!
  23. Mr Nice? Tried a search for "arnouts" site but no luck, u got a link? I know there has to be a way round this but alarm traders i've been to only seem to be interested in trying to sell me a clifford!
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.