Kopite

Just realised I've posted this in the wrong section Can a mod please move it to the for sale bit please?

Removed from my car during a respray. Average condition and the fitting tabs are broken so needs some work to fit. These seem to be hard to get now, I was quoted nearly £2k from Toyota for a new one (painted in black). Collection from Chigwell or you can arrange a courier £295

Where's it moving to Andrew?

No preference

Anyone have a stock rear non damaged rear bumper available? Thanks

Should fit a soarer of GS300 too

Sold These will be available in a few weeks 19x9.5J fronts 19x11J Rears Offsets unknown but they protroud about an inch past a stock supra arch so suits a car with wide arches. These have been refinished in Subaru gold the outer lip edge polished. These are in immaculate condition and come with barely used (dyno only) Cup 2 Tyres. The rear tyres have a groove from where the tyre caught the arch but this is minor and shallow. Collection from SRD or you can arrange your own collection. These probaby weigh 25kg a wheel & tyre. £1000 for the wheels and tyres, the tyres alone are expensive

Looks like it's just been delivered by Toyota

Once my car's back around Easter then I'll have a go some time

Replied

GTE dude, edited the ad. Cheers

Looks a bit rusty but was still trusty. These are usually £350+ new. £140 collected from SRD or you can pay P&P.

As per the pic. £15 collected from SRD or you can pay P&P

Has a small mark on it which is visible in the pic. £100 collection from SRD or you can pay P&P

Removed my current single kit for a 2JZ-GTE which has served me well. This had no issues at the time of removal, just seeking more power now. This has the following bits: OBX exhaust manifold 3 inch DP 4 inch Intercooler pipe for the hot side 4 inch air intake and filter Tial 44 mm wastegate Oil feed and return line This was difficult to price but considering a DP is approximately £200-£250, a wastegate £300 and the other pipes £200+, I think £750 all in is reasonable. I also have a 3inch mid pipe and modified Amuse R1 exhaust to complete turbo side which I can throw in for £1400 all in (they're still on the car so pics not available yet) Collection from SRD or you can arrange your own courier

Removed my clutch due to a new build. I *think* this is an RPS Max 6 Puck, this clutch handled a 600hp build fine and had no slip etc prior to removal. I've priced it accordingly, it is quite old but has done less than 20k miles. £350 collected from SRD or you can arrange a pick up.

Removed from a 1998 car, no issues when removed. Collected from SRD or additional P&P applies. £120

Stripping the car for a change of plans. Size is 600mm x 300mm x 100mm with a 70mm inlet and outlet. Finished as standard. £200 collected from SRD, alternatively you can arrange a courier.

£1850 available now, collection from SRD. Was in good working order when removed, removed due to a new build.

Have a look for Gareth Hetherington on here / Facebook, he's the man the LED upgrades. He can also put you in touch with Graham who does dial faces.

Found my old ashtray during a clearout It's from a UK car (not sure if there's any differences between UK and JDM), it's finished in Porsche Midnight Blue. No dents, hinges work fine. £20 collected from the Newcastle area (can adhere to social distancing) or I can arrange a door to door courier, would estimate £10 for DPD or similar due to the services on offer (post office would be a bit awkward in the current circumstances). This is also advertised elsewhere.

Looks amazing, a set of facelift headlights would really suit that colour

I had this in the drivers footwell and it was a dodgy window seal. Just incase it's seen rain lately

Vvti heads a possibility too?

Engine looms!