eyefi

for the past few months i have been mostly buying baby things, renovating houses and fitting singles with a lot of complicated custom work. enclosed a few pics of the final part of the single install. tomorrow i start to fit it all with gaskets. it's had :- gt35r turbo cams & cam belt BL crank pulley 650inj & fuel lines & fuel pump arnout manifold hks 50mm wastegate custom 4" down & mid pipe to hks titanium custom intercooler pipes tm bushing fuel pressure & oil temp gauge stock trac full removal it needs:- cardboard replacing with alu full alignment mapping spoiler removal

i thought cutting it off logged an error at the ecu or lit the dash light?

"they say he carved it from a bigger spoon..."

ive seen a white one knocking around wakey and ossett, sometimes with a woman driving and sometimes a bloke. i don't think they are on here.

stick a 5L v8 in

someone in the family builds the chassis at dax, he's had a few rushes, various engines. never driven one but pretty awesome from the passenger seat. a friends friend had a 3.5 ltr(iirc) striker, that was downright dangerous.

envy and paul w can get them, you can buy them from japan (takakaira) ebay etc. i suppose the NO auto support is a big issue.

the powerfc always gets over looked here and i'm not sure why. its a great simple ecu with a superb basemap. it has shit apex support but with datalogit is awsome. they can also be picked up for really good prices these days, probably less than e(justabout)manage.

most of this planets top physics geniuses believe in some kind of intelligence in the creation event, in other words a god.

2meg is the downstream speed (data to your computer). your upstream (data from your computer) speed will probably be 256k, this will limit your streamed output. 256 will still get you a reasonably smooth but not very big movie (or larger but not very smooth), you will be able to see whats going on but it won't be like at the cimema b&q have all sorts of low cost security stuff [shrug]

you would never be able to run the fuel map as is, but you can look at it and see how it's setup and you may be able to scale it and have a reasonable basemap. is the bucking happening all over the rev range and load range? just on part throttle? do you have a log of it happening (usual parameters)? are you using the base aem ignition map? if i remember correctly the timing on that map is quite mild (certainly compared to mine, which is quite aggressive) can i have a look at your map?

winners don't do drugs

bucking is not the flywheel, it's the tune. do you want me to send you my stock twins & fuel IGN & INJ maps. they ran like stock on my powerfc, not that i'd recommend just dumping them in and using them blindly.

thanks

is it ok to tow a manual supra? any bizzare reasons why not? cheers.

itunes shop (not p2p). easy, reliable, reputable, legal and fair price.

909.09 bhp/ton

have a look on SF. there are a few installed over there.

it's not that bad a job (on a manual at least). there's a lot of stuff to come off and the crank pulley isn't that bad with a 6ft bar. don't be suprised if your crank pulley hub is cracked. don't let them use heat on the crank pulley bolt.

stupid

sounds like your plugs should be ok. maybe coilpacks??

might just be plugs then and a dodgy compression reading (bad meter seal or something) try new plugs and another compression test

get a leakdown test done, that will show where you're leaking. anyone should be able to do this. then choose your engine builder. sounds like a valve because your not describing any other symptoms, but who knows. good luck

it's as safe as ordering from anywhere else. tm or mvp are stand up companies and i wouldn't hesitate to order from either. 3-7 days, usually 5. the r2 bushes are a poly bush developed for the gs300 (i think) it's the same suspension, so yes they fit. it's not a diy job really unless you have a big press or have very, very strong fingers the ride is harder but not bone shaker. i know where you can get some rubber bushes from (not trd) but they aren't cheap.

yep r2 do a rear set http://www.tmengineering.net/suspension/r2racing/index.html i've got a front and rear set.