EVLMKIV

I think this might help by way of set up. You Tube also has a couple of other vids that will help. I have the same gauge and this vid made sense to me...

Be sure to check for fuel smell after you get home from a cruse. Mine leaked after boost due to increased pressure. I also changed my fuel filter which I think may have been clogged with something. After that and the new crush washer my fuel leak went away.

A member got back with me and sold me a set for 350!!

NICE!!! Right now I would dang near do anything to have one...Been 7 months

:taped:Turned an engine over with the tentioner pin still in. nough said....

http://www.ebay.com/sch/i.html?_trksid=p2050601.m570.l1313.TR0.TRC0.X90+degree+cilicone+intake+pipe&_nkw=90+degree+cilicone+intake+pipe&_sacat=0&_from=R40 http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=90+degree+intake+pipe I hope this helps...

Agreed...

Nore did I

I had the same issue with my SC300 and it sucked. I found that I over torqued the crush washer and had to get a new one. Once I did that all was well. Someone on SF told me hand tight, but I just went with what was in the manual for tightening. It seemed a little tighter than hand tight.

Whats the offer?? What's the exchange rate?? If it comes close to what you have in it, I guess it would be up to you and what you are willing to gain and or lose. If you need the money drive on, but if not let them hound you for the possible purchase at on or close to what you want. I hope that helps.

[sHOCK][/sHOCK]Ok I purchased the Unorthodox cam gears from SupraStore.com. The guy emails me back with this statement. "I'm not sure that they are in stock" So I email back " Please let me know soon as I am wanting to hunt elsewhere if this is the case". Then I get another email that floats to the tune of " I have to hunt around to see if I can find some".... So naturally I'm on edge, and then it came to me!!! One member on this thread did respond with " I'm not sure that I would trust a company who spells the word light i.e. lite wrong in their cam gear advertisment" Or something to that affect. So I have canciled my order and am currently looking for the same set of gears. Does anyone have any Unorthodox cam gears to sell? I also looked on Supraforums and the $230 lot have been sold. I'll pay post as well of course. I will use PayPal and pay fees... Thanks in advance if anyone can help.[COOL][/COOL]

Thanks, and I went ahead and got them based off of the info given from a few folks on the thread. The moderator was right by banning me for a day. I have rebuked my evil ways and wish to start a new. I appologize for talking the way I did. My bad guys. I'll keep it clean.. Thanks again.

I had them on my 740i and they were very quiet as well as affordable. They are soft though and tend to gouge easily.

I'll check them out thanks...

This is true.. I'm sorry if I seemed course. Thanks for the polite and informative response.

I haven't been rude sense my own response to my own thread. I hope you're not serious. I'm sure that in the 14,119 posts you have given I can only imagine the rudeness that I could find. Lets not bark at the customer beckoning a response. I just want to know an answer to the question as to what are the differences between an NA can Gear and a Turbo cam gear. Suprastore.com has a set of NA Unorthodox polished cam gears for 335 USD right now and I don't want to miss out.

Nice come back...I'll continue to look around. Thanks

Firstly I have yet to find any sticky or thread talking of cam gears and the differences thereof. Secondly I have been googleing the crap out of it. Thirdly I cuss in a thread by the way is hidden and I get six instant replies. As for the guy who says he know's but is not telling is pretty crappy considering this is a place from which people are supposed to gain knowledge. I figured paying my dues and being a part of a forum would grant me access to said held information. I'm lucky to even get to check the net in this dump hole I'm currently in. Thanks for the top notch responses.

Hard to believe that 58 of you guys read this thread and not a fucking one of you can give an answer. I'll continue to research.....

Can i use NA Unorthodox cam gears on my GTE?

Take the tube off and use a small pipe bender to curve that bad boy. or curve it on the mani...easier said than done I'm sure.

So what rims are you going with on this future beast? I cant wait to see the sex change on this one. It's always a pleasure watching your threads..

Could be Abflug, I just did a google image search and the wing looks close to several of those photos, but if this is the case I would have to say this guy had the rear fingers on each side taken off and blended. This one's a stumper for me. I really like the stance...Thanks for the info though Jord

I have had a 95 civic with the back trunk lip cut from another trunk and welded and blinded into the lid for a higher more streamline look. But this thing actually looks like there is a small 3'' gap between the lid and the lower inner base of the spoiler. I've been hunting around. I will just have to call this guy when I get the chance. I want to post more pictures not to mention the paint is nice. I'm not one for orange but that black in the same spot on a white background jus might hold up. The scheme reminds me of that 1986 Movie The Wraith!!! Has anyone seen that one? If not look it up it was for sure ahead of its time. Then again my eyes may be playing tricks and there just might not be a gap.....

I agree with the blending job as it pertains to custom work. Now the lip becoming a spoiler is ingenious...Looks great DR. I reviewed some of your YOUTUBE vids and I have to say that your ride is very nicely done. Quick in the small neighborhood as well. lol:Pling: