Hartmann
-
Posts
496 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Hartmann
-
Finally. the surface is smooth and even -- lovley then it is just to smooth the surface with 500grid -800grid -1000grid an polish the hole thing to at perfect shine:clap: but set it to dry for a week or 2 before
-
when the first coat of epoxy resin is dry . skuff the surface bag wery lightly with a 180grid. just to take the tops off the resin ... DONT mess with the fibres this is after 2 or 3 applications and then you just keep doing this procedure over and over and over again.. to the point were its totally smooth and non of the fibres i poking true, the surface
-
year .. i´d realised i have fucked the upload up
-
thats that when al of the parts ar covered in carbon .. let the dry over night so it isn´t gonna move my work space (a spray booth ) and the gray beast in the back NOW:Pling: comes the business part comes.. mix your clear Epoxy resin 2:1 and with a soft (wide) brush apply with "dapping" it on . NO brushing it on that will disdurb the fibres
-
start cutting the carbon matt out in pieces. big enough to every dash panels .. and when the Epoxy is ready .. lay i down on the panels. and push it gently to the epoxy trim of the edges back 2cm from the panel edge. so there is some fabric to turn around the edge so the front look like this
-
thats bad ! any one else have that problem ?
-
so then i filed the front side with bondo/filler. to level out the metal plate with the front panel next step, is to get the part ready for the carbon fibre mats.. the panels have to be blackish in order for the carbon to be 100% black like this when the black coat is dry sand it with a 180grid paper then its time to give the parts, and ligt coat of epoxy resin. and let it dry enough not to stick to the finger..
-
hello guys , just want to show how i have done my center consol. so i dont have the gauges all over the place Starting by sanding ALL! of the "rubber skin" of the panel.. trimed the backside, so the metal plate fit like this and this front Then i glued the metal plates to the panel with at strong sealer. and dryed it over night.. and i dont have it in picture. but i´ve drilled the holes for the guages ind the metal plate after the sealer had dryed..
-
did you cut a "slice" out of the dash or a hole the cage could go down true ? and i assume it´s race legal allthougt its not welded to the car ?
-
is it at home made cage you have jp ?
-
how i´d did mine
-
some pic of my home made intake whit RMR 90mm throttlebody ... dont know if the intake is any good ... but i´ve just have to see
-
so race ! .. lovely car and so powerfull in drift
-
yes they do .. abit of seaching on supraforum give them a bit of a hard time .. but they seems okay now ..
-
2x TAIL 44 wastegate ... full devided system Powerhouse racing NEW tubular manifold great piece of work ........ but toke 5 month to get and dont fit without raising/pull out the engine couple of flashing gauges home made center consol in carbon.
-
thanks guys . . power wise i have no ideas . planing on around 700hp at a start .. but don´t know.. its my first bulid its still a stock buttom but thinking of pull the engine out to get i forge, new bearings Etc.
-
very helpfull ! thanks mate
-
got rid og the old harness ! .. think i´am going with a Chasebay.com harness ALL out ! dash out .. think it´s going to flocking? got these bad-boys .. i forsure dont have to be bigger .. thight squess ;D
-
brand on them doorcards ? or are they custom? .. looks great
-
how much lighter did the walet get buying one of them ? looks solid ! .. any one have tried these yet ?
-
Precision PT6766
-
Jos's Silver Shadow (My achievements thanks to this forum so far..)
Hartmann replied to Jos's topic in mkiv Supra Projects
maybe but rather loose the arm thought -
Jos's Silver Shadow (My achievements thanks to this forum so far..)
Hartmann replied to Jos's topic in mkiv Supra Projects
what a nice piece of work ! would give my right arm for at rear suspension like that mate ! must be my next task .. -
TheTurtlesHead's Fuse Box to Boot Relocation Guide
Hartmann replied to TheTurtleshead's topic in Supra Chat
what about the 2 connectors under the fusebox. ? are they extented into the car ot do they clip togther at the original place ? great guide ! am about to do the same .. but is at confusing task -
im glad that you did´t salvage that beautiful car. ! Neti had it for sale in DK with stock engine
