black_widow87

They look to be diamond cut dishes with lacquer, could be wrong. This is the original finish from Rota.

These wheels are now up for sale... 2 x Rota GTR 8.5j et 35 2 x Rota GTR-D 10j et 35 Wheels do have kurb marks and imperfections on the dishes but the centre spokes are in good condition. Looking for £575 collected due to weight..

Front left or right mate?

After a front left UK spec caliper pretty urgently. Preferably in good working condition. Cheers Jake

Evening all, After pulling the car out the other day noticed a pool of brake fluid on the floor just under the front left caliper. After a closer inspection I have noticed a hairline crack coming off the caliper banjo area. I believe that it has been over tightened by my old mechanic a few years back as the copper washers were flat as a pancake, causing the casting to crack after a period of time under such torque. Now what what my options? Is the caliper repairable? Or is it a replacement job. ..The copper washers in the pics are new as I originally thought they were the cause of the leak. Cheers Jake

Preferably mate. Don't want to risk cracking the covers due to using non - toyota washers..

Looking for a full set of 16 washers, preferably before this weekend. Cheers Jake

Pics..

Bump.. These will be up for sale end of the month without tyres. Looking for £600 collected..

Pm'd

Bump

I'm after a pair of hubcentric spacers to allow my wheels to clear my UK front brakes. Preferably between 10 - 15mm, and from a reputable company H&R etc. Also will need 10x extended wheel studs to accommodate for the spacers. Cheers Jake

Bump

Bump

I have one for sale mate. Check out my for sale thread.

Potentially interested in the Apexi cat back. Any pics? Is it the 3.5" piping?

Bump

Bump

Id recommend the S364. Not been on the rollers with mine yet since the install but I'd say it's producing around 650 at 1.5bar on an unopened engine.

Pm'd

Bump