Callaway Motorsport

same here, pics please

Edit: I have now found the german company that does it also (under 1 hour drive from my place) am bringing mine this week. Pretty pricey though to say the least 260 euro for one wheel and one inch. extra inches are 35,- euro per piece. I will feedback on the quality, as they mention that they are one of the best in doing this.

Too bad this happened, good luck with getting it all sorted. I'm sure it will be up and running soon

Site IS offline now. anybody now if he is still available? Wanted to get my Works wheels over there.....

Great work on the engine bay, color choices really good, makes it look clean and simple at the same time whilst you even have most of the stock items in there... Very nice....

I was going to use this for the mot etc over here, but changed my mind. Stock looking Kakimoto exhaust, not too loud, gives a nice rumble though Did a new paintjob on it (heat resistant black) and polished the endpiece again. For sale and can be shipped anywhere in Europe. Price: 230 GBP shipped to your door. Pics: https://lh4.googleusercontent.com/_mZNTX4tRdck/TdJmfIC9JsI/AAAAAAAADa0/NQx_DFY4NPY/DSC_0229.JPG https://lh5.googleusercontent.com/_mZNTX4tRdck/TdJmfk-0b4I/AAAAAAAADa8/YOB6bDVdR4I/DSC_0231.JPG https://lh6.googleusercontent.com/_mZNTX4tRdck/TdJmf3684xI/AAAAAAAADbA/yOfkt7pIsj0/DSC_0232.JPG https://lh6.googleusercontent.com/_mZNTX4tRdck/TdJmfZoqBCI/AAAAAAAADa4/eQcYpfOx3ts/DSC_0233.JPG

Second in line for the exhaust

bump

Jamie, this guy is looking for oem skirts (which i believe you want to get rid of) http://www.mkivsupra.net/vbb/showthread.php?245931-OEM-Skirts-replica-s-are-okay-as-long-as-they-are-a-good-fit.

Jamie has some on his V8 supra, i think he's looking to get rid of them....

close

frick, ME WANT. that is awesome. really nice work...

Just what i was thinking, lol. Some nice snail you have there, though i bet its not slow

Damn, thats an awesome figure, looking forward to seeing results from the bigger turbo's. looks like they will kick some Precision turbo butt...

looking for a damaged Works CR Kai wheel in 18 inch...anybody? width andcolor is not important, just the 18 inch diameter.

Terminator has some good injectors for sale, They will not fit the standard fuelrail though. Only HKS/PHR/Titan fuelrail as they are topfeed: http://www.mkivsupra.net/vbb/showthread.php?235572-BNIB-LOW-imp-Injectors-Precision-1200cc-96lb-h-matched-set

Hehe, you going even bigger?

let me get back to you..... got a pic you can send?

Sabelt do some very good ones. out of personal experience i would suggest those. As the quality is second to none, even against other brands. Plus they came out a few tests as the best (especially their locking and quick release systems) these are the ones i have... http://www.racing.sabelt.com/index.php/eshop/product/SabeltRacing-Top-Formula-4-Fixing-Points-Harness:-32.html/1/pid/166/frmCatID/984/ and then in black. FIA approved. https://lh4.googleusercontent.com/_mZNTX4tRdck/Sz59M9POfVI/AAAAAAAACUU/pJKtaWFN_qY/s512/DSC05710.JPG

these still for sale? PM

is this new or used?

if sale falls through i would be interested

Haha, same problem i have Looks great John, hope to see this beast at pod this year....if i can make it.

Last map on my car for quite a while, as its being worked on by ourselves at the moment, will be remapped in future with alot more power to boot. Current status: Name: DC Automotive aka Dane ECU: HKS Fcon-VPro gold V3 Trans: Manual Turbo: HKS T04-R (T67) Journal bearing (0.98 a/r exhaust housing) Cams: stock Mapped By: Geoff of Re:Worx Result: 490.9BHP@5600RPM roughly and about 415Ftlbs Notes: 1.2 BAR (fuel system to be replaced as stock system could not pull it off, only larger injectors currently) otherwise would go to 1.6 Bar Rating: 10/10 for the work he did, even though the fuel system could not go higher, the spool and power the car gives is real smooth and powerfull. https://lh6.googleusercontent.com/_mZNTX4tRdck/Sz6KSaeeCTI/AAAAAAAACV8/gswCPjjZzbE/s576/Dyno%20run%20Re-Worx%20small%201.jpg

All sounds good, very nica plans. Looking forward to seeing this beast fly..