alaing
-
Posts
381 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by alaing
-
Just to add some useful information to this thread, When i changed my heater matrixes ( pulral? i dont know) over it was clogged full of rusty crap which restricted the flow of water quite alot.
-
POSE!!! moi.
-
Ok guys thanks, thought it might come to a press!
-
Dont sell its a beutiful car! Plus it will be even better with the UK spec brakes on it!
-
bumpski
-
Dont fit them with the wires the wrong way round like i did! u will get a missfire!
-
Thanks probrox keep me posted! Ben i dont blame you!
-
Possible want one of these as bearing is being a pain so if i can get one for circa £70 i can just bolt the whole assembly on . Should look like below : Thanks
-
Any tips for getting the hubs off the carriers? im really stuck!
-
I have got this far with taking the bearing out of the offside rear hub, but i have come to a halt as i cannot drift the hub off?![ANGRY][/ANGRY] It says in the manual that u should use a slide hammer, i dont have one nither do i think it would work. Any suggestions plaese
-
I replaced mine with a secondhand unit i just gave it a visual check, then dunked it in water and pressurised it to see if any bubbles came out. Got nothing so put it in.
-
This is the best thread ever!!! Do u think when its done we can have it edited so its with out the comments and just the engine rebuild? Like a how to.
-
Cool well mine isnt quite on the road yet, ive got a tt aero but when its done ill pop down to see yours. But if u need a hand with anything im quite good with the supra so i dont mind giving u a hand if u need it. Alain
-
wow looking good, your in btree aint u? Ive seen your car over at hein gerik. Im in btree too. Is it tt or na?
-
Those new suspension parts look sweet! dont suppose u have the old ones still do u? i might need some o/s/f parts.
-
Are the mats in the pics up for sale?
-
They cut your wheel off?! Why didnt they just drill the nut off rather than destroying the wheel?
-
Thought id post this here as well as mr2oc. Car went in for its mot this week and failed on emissions, the reading was 7.5% !!!! When it should be down at 3.5%. Shes a rev2 tubby with the cat still in place and no other modifications. What could make these readings so high?! I have recently replaced the TPS sensor as i had idle issues but seem to have solved that now. Any input would be a BIG help Oh, no fault codes or anything else. Thanks in advance Alain
-
Another way is a towel over them with the headlamps on full beam but be careful can get quite hot!
-
Does anyone have any suspension measurements, i fear one of my wishbones may be bent slighty but having problems finding it and help would be good thanks.
-
Brake fluid level most likely, the brake fluid level sensors are very sensitive so even if it looks full top it up a little more. But if this is not the case read the fault codes as above and get back to us.
-
Looks like supragirle is having these folks thanks
-
OOPPSS double post could a mod delete this for me please?
-
Only selling due to not fitting under my wheels . I have given first refusal of these to supragirle as she mentioned wanting them in a previous thread, but if she dont want them they are up for grabs! Uk spec rebuilt front calipers new clips, pins etc. New pads and the disks although have slight surface rust on them are very new. these calipers are just missing bleed nipples (which i forgot to order) and stickers to complete them. Looking for £400 plus delivery or collection would be best for me plus ill fit them for you FOC if you collect if wanted. Thanks Alain:D
-
I have given first refusal of these to supragirle as she mentioned wanting them in a previous thread, but if she dont want them they are up for grabs! Uk spec rebuilt front calipers new clips, pins etc. New pads and the disks although have slight surface rust on them are very new. these calipers are just missing bleed nipples (which i forgot to order) and stickers to complete them. Looking for £400 plus delivery or collection would be best for me plus ill fit them for you FOC if you collect if wanted. Thanks Alain:D