Sharpie
-
Posts
5345 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Sharpie
-
Ian, did you ever get round to testing this out ? I guess this would prove if running 1.4-1.5 gives you more power than 1.2-1.3bar on your set-up.
-
Sorry to hear this Paul, you are now without a car so, they should give you a courtesy car (FOC) till yours if fixed.
-
It's a shame they do not make them that thick anymore
-
Need the A-Z for suspensions ? Anti-roll Bars Bushes Coilovers Coilsprings Dampers Noise, Vibration and Harshness Pitch Top Mounts Tyre Profile etc.... Check out Jap Performance Mag, Jap Tech section. Issue 38 (March) You will not be surprised to read, that it only reiterates what CW has been saying for years.
-
Paul, do you still have the original cream mats with the two fixing holes and the rubber Supra logo on them ? You can not get them anymore and the ones that you can get from the dealers only has one hole in them now. HTH m8
-
I stand corrected
-
The stock look
-
It’s still the stock cover and materials (Aluminium ?) it’s just that the paint has been stripped from the perforated area and buffed I guess…. I’m not sure if they will spray it with lacquer to protect it but, will ask. Do you think it will still fade even with a protective coating on it ?
-
I do believe that this is reserved for Hiper :flame Dev
-
Kevin from Envy has the blue LED's in his UK car.
-
.
-
Keep it shiny to match the FMIC or put it back to stock ? i.e. black Just a small mod Toyota have offered me, for that “something different” look ?
-
Very nice Michael - Good job Emin This would bring my dash into line with my Boost/EGT gauges. Emin, can you pm me a price ? I'm only in Reading
-
Come on Paul, use the Search All you ever wanted to know about car mats - http://www.mkivsupra.net/vbb/showthread.php?s=&threadid=5275&highlight=car+mats
-
Tony, I asked the same questions via email before I got the CW suspension: The CW suspension is now based on the Bilstein shocks as Koni do not so the units that Chris used anymore. Springs are custom and it's a CW custom Geo setup too, that he does in his workshop. No sway bars, top mounts, bushes or strut bars It made a HUGE difference to the UK suspension that I had and I love it. Well, I only had 2 days with it before my current situation but, I remember it well :flame Dev Money well spent
-
I was just thinking that too Welcome
-
I just got a quote from Bracknell Tire and Battery for stock sizes for the GSD3's £94 up front and £115.15 for the rear so, that's £418.30 - ALL IN I guess you won't be needing this now T. All the best though!
-
-
Getting better by the week Won't be long now.......? Easter ??
-
The CW suspension does make the car a totally different ride
-
Chris Wilson is not far from you. Chris Wilson. Race and performance road car servicing and preparation in north Shropshire. Home / Work : 01948-841581 Mobile: 07971-952084 Please use direct e-mail, rather than PM's, thanks! [email protected]
-
WTF "Ordinary non-tinted window glazing being around 80% visibility, a 30% reducing tint film applied to your vehicle would still be illegal. It surprises people that they don't get 100% visibilty from their clear windows but this is due to a lot of the light being reflected and refracted." So, if you have very light smoke then, it's still illegal - Unless you have a sub 10% reducing tint.
-
BOV on Auto and Stall - Do you suffer from it ?
Sharpie replied to Sharpie's topic in mkiv Technical
Hey Neil, I was thinking about this but, would it not reduce the noise that it makes ? I guess if it's recir'in then that's the main thing. Do you have an induction kit too ? -
Pentagon just told me that my Smoke tints on the side windows forward of the B post are 35% and so, will remove these free of charge when I produce the Invoice I'm sure the light smoke were the 30% ones.
-
Hi, I have a HKS SSQV which will be going on my Auto when I get it back but, wanted to know if anyone with the Auto and aftermarket BOV suffer any stall problems. AND Does anyone have a HKS Recirculation Fitting for 1'' ID hose (SSQV) fitted to remove the stall problem ? If so, how does this affect the BOV sound ? Ta
