Jump to content
The mkiv Supra Owners Club

Vagnum

Club Members
  • Posts

    305
  • Joined

Everything posted by Vagnum

  1. If there for a tt?? I'll defo have them off you
  2. I've been looking around for someone to recondition/re-valve my bilstein and was wondering what was involved in doing it. I found this site which shows how the shock is striped down and reconditioned. which I found interesting and was thinking how you could run your own set-up with by adjusting the gas pressures in the shock. Anyone got any ideas what sort of pressure bilstein put in there toyota supra shock's or know what get's put in after being reconditioned? am I right in thinking that the more gas you put in the harder the rebound rate would be and vise versa?
  3. Just been looking in to it a bit more the company that sells them in the uk are tegiwa imports
  4. I've been looking around for a clutch kit that's not going to cost an arm and a leg and came across f1 racing who do a whole range of clutches, light weight flywheels and brakes they are based in the states but have a distributor in the uk, has anyone heard or used any of there parts? They say that there stage 2 kit is good for about 460bhp which sounds good for my bpu.
  5. Hello might be interested mate, what spring was you going to run on the front?
  6. I got one kicking round mate if you want it
  7. Hi everyone i need a front panel, the one that bolts between both wings and the headlights sit on ??
  8. After a j-spec standard front bumper, any colour will do as long as it's in good condition.
  9. cheers dude, think i'm going to replace mine never liked the way it was fitted in anyway i think it may of been fitted by japvillage. when i frist got the car the wiring behind the dash was a joke!
  10. did you manage to get to the bottom of this? i've a similar fault, up to about 70 it reads ok anything above that 80-100 reads 140mph
  11. free bits are going in the bin after this weekend.
  12. thanks guys but i'm looking for a cheap leaking unit someone has replaced for a good one that they don't need before they bin it
  13. i'm after a rhd steering rack old exchange unit or been leaking from arm seals and no external damage
  14. just been having a sort out and got a few bits: Front lower arm bushes for late arm so the large type bush £35 inc P+P Blue pipes 1's: inner 61mm Straight Coupling Hoses, other is: inner 77mm Straight Coupling Hoses. I think they come off my HKS piping. £ Just something to cover P+P. Alloy Straight Coupling pipe outer 69mm. £ Just something to cover P+P Aerial working ok when removed £sold x1 Side repeater lens £Just something to cover P+P. UK Spec EGR Blanking Plates £Sold Connector don't know what they are for i think they go behind the head light got about 4or5 £ Just something to cover P+P (and no thats not my hand) Supra nitro rc shell £sold Active spolier the all the bits £SOLD cold start temp sensor part no.89422-35010 got because i had a misfire from cold but was my spark plugs. PAS pump pulley £ Just something to cover P+P Also have the alternator and water pump pulleys somewhere.
  15. just found the ad. I didn't think they where the same.
  16. I was looking on Ebay earlier and came accross a set of used j-spec cams for sale (which have now gone) and the ad said that you can use the EX cam to replace the IN cam so your using 2 EX cams. I've never heard of this before and was wondering if this is right? and if anyone has done it?
  17. Engine Specifications: 3000L TWIN TURBO TRD OIL FILTER WHIFBITZ HARD PIPE TOP HOSE 3-PLY BOTTOM RAD HOSE MARK-S RADIATOR COOLING PLATE MARK-S SLAM PANEL COOLING PLATE PAINTED BLUE ALLOY RADIATOR ELECTRIC COOLING FANS REVOTEC ELECTRONIC FAN CONTROLLER 32mm ID HOSE LIGHT WEIGHT ALLOY PULLEYS ALT/WATER/P.A.S POWER ENTERPRISE TIMING BELT UK SPEC INTAKE CAM ADJUSTABLE CAM GEARS (TO BE FITTED) Turbocharger & Induction: STANDARD TURBO'S COOLING MIST WATER INJECTION (TO BE FITTED) K&N FILTER WITH BOXED HEAT SHIELD BLUE COLD AIR FEED PIPE LARGE FMIC 1/2 HKS HARD PIPE 1/2 CUSTOM ALLOY 3" PIPE BAILEYS EVO DUMP VALVE Fuel, Tuning & ECU: MINE'S ECU CHIP BCR8ES NGK WALBRO 255ltr/Hr FUEL PUMP BLITZ SBC i-color Exhaust: 1st DECAT PIPE + 1.2 RING C.W 2nd DECAT PIPE HKS HYPER TITANIUM RACE SERIES EXHAUST Drive Train: SHORT SHIFT MOTUL DIFF OIL F1 RACING STAGE 2 CLUTCH KIT (TO BE FITTED) Suspension, Wheels, Tires & Brakes: TOYOTA BILSTEINS TANABE SUSTEC GF210 SPRINGS PAINTED BLUE TRD FRONT STRUT BRACE 18" VORTEX R WHEELS DRILLED FRONT DISK'S EBC RED FRONT BRAKE PADS DOT 5.1 BRAKE/CLUTCH FLUID ALLOY P.A.S COOLER MOTUL DEX 111 PAS FLUID SUPERPRO REAR LOWER ARM BUSHES Interior & ICE: PIONEER DEH-P80MP HEAD UNIT PIONEER CD-IB100 FOR iPOD ALPINE SPS-171A SPEAKERS MOUNTED IN DOOR PANEL KENWOOD REAR SPEAKERS SILVER/GREY PAINTED DASH TO MATCH HEAD UNIT LED DASH LIGHTS METAL MONKEY DIALS WITH BLUE BACKING LED DIAL NEEDLE BACK LIGHTING Exterior: CUSTOM SILVER PAINT JOB TINTED REAR WINDOW AND 1/4 WINDOWS FACE LIFT FRONT HEAD LIGHTS HB3 8000K HID KIT (TO BE FITTED) FACE LIFT REAR LIGHTS FACE LIFT FRONT INDICATORS CLEAR SIDE REPEATERS TOYOTA SKIRTS/SPATS TRD REPLICA FRONT LOWER SPLITTER Performance: 338.6 RWBHP (405.3BHP FLYWHEEL) @1.1BAR DYNO BY SRR NOW RUNNING 1.2BAR Wish List: 550cc INJECTORS ADJUSTABLE FUEL PRESSURE REGULATOR HYBRID TWIN TURBOS RACELOGIC TRACTION CONTROL ROAD SPRINGS ?
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.