T2 MSW Posted August 1, 2017 Share Posted August 1, 2017 Does anyone have a technical diagram for the placing and positioning of Oil squirters? Basically so I can give to to the Machine shop to get them machined into an NA Block. Link to comment Share on other sites More sharing options...
Frank Bullitt Posted August 1, 2017 Share Posted August 1, 2017 (edited) This any good - http://my.is/forums/f114/how-install-oil-squirters-ge-block-410078/ or this http://forum.clubna-t.com/showthread.php?t=4956 Edited August 1, 2017 by Frank Bullitt Link added. (see edit history) Link to comment Share on other sites More sharing options...
T2 MSW Posted August 1, 2017 Author Share Posted August 1, 2017 It is yes thank you for that. Least I can get my Oil feed done myself. However was thinking of a technical diagram that gives the precise measurements so they can be put into a CNC machine Link to comment Share on other sites More sharing options...
Style Posted August 1, 2017 Share Posted August 1, 2017 Interested to know the results of this too. How much power are you going for mate? Link to comment Share on other sites More sharing options...
Dnk Posted August 1, 2017 Share Posted August 1, 2017 Think you or whoever's doing the job would be better off using something like a Bridgeport turret mill with a DRO on it Link to comment Share on other sites More sharing options...
TRD-1 Posted August 1, 2017 Share Posted August 1, 2017 (edited) Chris Wilson might be worth having a chat with, as I remember a while back he was offering a service drilling a NA block to allow for the oil squirters to be fitted Edit.....See this post http://www.mkivsupra.net/vbb/showthread.php?115876-Convertin-N-A-blocks-to-take-TT-oil-squirters-any-interest&highlight=block Edited August 1, 2017 by TRD-1 (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now