Graham1984 Posted March 31, 2015 Share Posted March 31, 2015 Are you admitting you've done 180mph on an open forum? I've done an indicated 160mph Link to comment Share on other sites More sharing options...
Chris Bailey Posted March 31, 2015 Share Posted March 31, 2015 I've done an indicated 160mph You must have been bored that day, bet it took ages to get to 160mph. Was that on the fast&furious runway? Link to comment Share on other sites More sharing options...
Graham1984 Posted March 31, 2015 Share Posted March 31, 2015 You must have been bored that day, bet it took ages to get to 160mph. Was that on the fast&furious runway? Actually it was a downhill section of the A3. Link to comment Share on other sites More sharing options...
Guest Sausage Posted March 31, 2015 Share Posted March 31, 2015 Yes I am. It's not again the law to 180mph. Runway race track off road etc etc. just coz someone said they did a 180mph with Video proof don't mean they did it on a uk road. People take there cars abroad etc could even do that on a dyno. Link to comment Share on other sites More sharing options...
mattdavies Posted July 6, 2015 Author Share Posted July 6, 2015 So the other day I can confirm mine is more then 500rpm above stock. I was using manual mode and the needle was approaching 8000rpm as I was late on the shift and it didnt shift as quickly as it normally does. Luckily all my valve train is still in place but I think I will be investing in a rev limiter Link to comment Share on other sites More sharing options...
Nick Posted July 6, 2015 Share Posted July 6, 2015 From memory most have a small increase in the rev limit. I'd call the office they seem to have a couple of people working there that speak English now. Link to comment Share on other sites More sharing options...
Alex Posted July 6, 2015 Share Posted July 6, 2015 The Rev counter isn't *that* accurate. @mattdavies like the speedo... Link to comment Share on other sites More sharing options...
Graham1984 Posted July 6, 2015 Share Posted July 6, 2015 So the other day I can confirm mine is more then 500rpm above stock. I was using manual mode and the needle was approaching 8000rpm as I was late on the shift and it didnt shift as quickly as it normally does. Luckily all my valve train is still in place but I think I will be investing in a rev limiter Do your ears not work??? Link to comment Share on other sites More sharing options...
Guest Sausage Posted July 6, 2015 Share Posted July 6, 2015 Tbh I would. Was thinking bee r but I've since blown mine up due to major boost spike the ecu didn't fuel cut had this a couple times. But most the time it cuts at 1.2 bit odd but shit happens not parked up looking abandoned Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now