TBDevelopments Posted February 24, 2014 Share Posted February 24, 2014 bit of a wierd description but was wandering if anyone has ever made OEM style side skirts but where there is a rounded section front and rear of the skirt it just goes all the way across. I really liked them when i first had the car but the more i look at it, the more i feel its got a "jacked the car up in the middle and bend the frame" look about them. I guess it would look a bit like a topsecret side skirt but not as aggressive. I would photoshop it but paint is about as good as i can get and even then it looks terrible lol Tim Link to comment Share on other sites More sharing options...
Westy Posted February 24, 2014 Share Posted February 24, 2014 Ridox Skirts! Link to comment Share on other sites More sharing options...
TBDevelopments Posted February 24, 2014 Author Share Posted February 24, 2014 already looked at those, but there not the same, they have the same bit missing in the middle of the rounded profile but have a flat base bleeded onto them. Tim Link to comment Share on other sites More sharing options...
j_jza80 Posted February 24, 2014 Share Posted February 24, 2014 I think the idea with the OEM skirts, as with the Veilside ones, is to give the impression that the front and rear wings are more flared than they actually are. Link to comment Share on other sites More sharing options...
nevins Posted February 24, 2014 Share Posted February 24, 2014 Closest you'd get to your vission is possibly doluck skirts or if you can find them top secret. Link to comment Share on other sites More sharing options...
ripped_fear Posted February 24, 2014 Share Posted February 24, 2014 Go custom mate, get some cheap fibreglass ones, cut the centre out and get moulding! Link to comment Share on other sites More sharing options...
skippyboyo1 Posted February 24, 2014 Share Posted February 24, 2014 Ooooo I don't no jake fiberglass is horrible on bumpers and skirts. 1 knock and it's over.... Been there done that.... Never again Link to comment Share on other sites More sharing options...
Dan_Turism0 Posted February 24, 2014 Share Posted February 24, 2014 Blitz would be the closest imo, you could even remove the bit that attaches to the front wing to give it a cleaner look Link to comment Share on other sites More sharing options...
ripped_fear Posted February 24, 2014 Share Posted February 24, 2014 Ooooo I don't no jake fiberglass is horrible on bumpers and skirts. 1 knock and it's over.... Been there done that.... Never again True would be a sin to butcher a set of oem ones though. plus if your going to bridge a gap between the oem bulges I guess you would have to use fibre glass anyway. Know what you mean about it being fragile though had the same issue with the old lip. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now