Guest Deano hks Posted January 26, 2013 Share Posted January 26, 2013 Hi, tried to jump start my supra earlier and the engine started to turn over but then it made a noise like a fuse blowing. Now I have no power to my car at all, I checked the fuses and they seem to be fine. was wondering if it sounds like the 120a fuse has gone or any other ideas???? Link to comment Share on other sites More sharing options...
safcdixon Posted January 26, 2013 Share Posted January 26, 2013 Iirc The ecu has too relearn and reset, take it for a little drive and see if it improves. Link to comment Share on other sites More sharing options...
Guest Deano hks Posted January 26, 2013 Share Posted January 26, 2013 Iirc The ecu has too relearn and reset, take it for a little drive and see if it improves. I have no power to turn the engine over mate , no ignition, lights , etc Link to comment Share on other sites More sharing options...
Benjy Posted January 26, 2013 Share Posted January 26, 2013 Popped the main fuse by the sounds of it Link to comment Share on other sites More sharing options...
safcdixon Posted January 26, 2013 Share Posted January 26, 2013 I have no power to turn the engine over mate , no ignition, lights , etc Oh Fail on my part for not reading things properly, yeah it could be the 120amp fuse have you tested the 120 fuse? or could possibly be the ignitor pack Link to comment Share on other sites More sharing options...
Benjy Posted January 26, 2013 Share Posted January 26, 2013 Ignitor pack won't kill the car Link to comment Share on other sites More sharing options...
safcdixon Posted January 26, 2013 Share Posted January 26, 2013 Ignitor pack won't kill the car Yeah ignore me, im still thinking that its turning over Link to comment Share on other sites More sharing options...
Guest Deano hks Posted January 26, 2013 Share Posted January 26, 2013 That's what I was thinking Ben. The 120a fuse looks fine but ill test it tomorrow morning when I've got some daylight. Thanks. Link to comment Share on other sites More sharing options...
Benjy Posted January 26, 2013 Share Posted January 26, 2013 Pull it out and hold it up to the light. Stupid question but you've checked the battery terminals are actually making contact still, haven't you? Link to comment Share on other sites More sharing options...
Guest Deano hks Posted January 26, 2013 Share Posted January 26, 2013 Yeah the battery terminals are fine Link to comment Share on other sites More sharing options...
skippyboyo1 Posted January 26, 2013 Share Posted January 26, 2013 Fuse defo Link to comment Share on other sites More sharing options...
Dnk Posted January 27, 2013 Share Posted January 27, 2013 (edited) Isn't the 120 amp fuse bolted into the fuse box so you can't just pull it out ? Should be pretty obvious if its blown as its wasted away on the top so this is where it melts and you can see this as it has a clear top. You didn't get the jump leads on backwards did you as this will blow the 120 amp fuse ? Edited January 27, 2013 by Dnk (see edit history) Link to comment Share on other sites More sharing options...
David P Posted January 27, 2013 Share Posted January 27, 2013 The main fuse is in the bottom of the No. 2 fuse box. Link to comment Share on other sites More sharing options...
Guest Deano hks Posted January 27, 2013 Share Posted January 27, 2013 I had a quick look today and tested the fuses in both fuse boxes and they all seem fine. I'm now thinking maybe it has something to do with the immobiliser.........and no I didn't get the jump cables mixed up. I need to have a good look round it when I get a day off. Link to comment Share on other sites More sharing options...
Drew_flux Posted January 29, 2013 Share Posted January 29, 2013 The 120amp fuse is held in with two 8 mm bolts from the underside. you have to split the fusebox to get it out. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now