Guest cliogerbil Posted November 22, 2012 Share Posted November 22, 2012 Hi After a bit of an accident with a barrier last month, i'm thinking rather than putting the front end back to as it was (pic below) I will be making some changes. I've got some vented wings lined up and will be having a different front bumper. I'm also thinking of changing the headlights to something else as for something different. Here's what it looked like before After the accident and after some tidy up Im pretty handy with fibreglass. Which lights do you think might suit the shape of the front end? Link to comment Share on other sites More sharing options...
James Posted November 22, 2012 Share Posted November 22, 2012 Im pretty handy with fibreglass. Which lights do you think might suit the shape of the front end? I think the Supra ones work pretty well... Difficult to say as I have never been a fan of any different front ends I have seen. Something that I would try if going for something different would be an LFA front, as I think they look great: http://newspaper.li/static/5f4e16d98bbc95c6d7f43a3000109a4a.JPG Link to comment Share on other sites More sharing options...
Guest cliogerbil Posted November 22, 2012 Share Posted November 22, 2012 i agree but i'm thinking the LFA lights will be a bit steep and possibly a little out of my budget..lol Link to comment Share on other sites More sharing options...
listy Posted November 22, 2012 Share Posted November 22, 2012 The Gen 7 celiac light look pretty good on there. A member had the conversion on his supra. Can't remember who it was though, sorry. Link to comment Share on other sites More sharing options...
RCK10 Posted November 23, 2012 Share Posted November 23, 2012 Link to comment Share on other sites More sharing options...
Guest cliogerbil Posted November 23, 2012 Share Posted November 23, 2012 Im thinking the celica ones look pretty good too to be fair..or 370z. Link to comment Share on other sites More sharing options...
RobD Posted November 23, 2012 Share Posted November 23, 2012 Celica has been done by quite a few now, if I was to change the front I'd probably go for something similar to a supra front end as possible, keeping the rounder looks of the car and not adding and straight lines which would look odd to the rear of the car something like an updated 2000gt or 240z look Link to comment Share on other sites More sharing options...
Guest cliogerbil Posted November 23, 2012 Share Posted November 23, 2012 hmmmm yeah 3000GT lights could work well Link to comment Share on other sites More sharing options...
spikedjack Posted November 23, 2012 Share Posted November 23, 2012 Those chasis rails look pushed over to the drivers side from the images so be careful, damage maybe worse than just panel damage! Link to comment Share on other sites More sharing options...
Supra Gaz Posted November 23, 2012 Share Posted November 23, 2012 That looks pretty ruined mate,has it be laser checked? Link to comment Share on other sites More sharing options...
jazz1 Posted November 23, 2012 Share Posted November 23, 2012 Is stick with the original and spray it all black and remove that spoiler . Link to comment Share on other sites More sharing options...
Guest cliogerbil Posted November 23, 2012 Share Posted November 23, 2012 i'd like to keep it the same colour as that's the main reason i bought it back in the day. The damage i'm pretty sure is just panel damage and slam panel as it drives perfectly fine. It hasn't been laser checked but the barrier hit above the chassis rail and didn't even mark it. It was also a near enough flat impact at lowish speed so looks worse than it is. Link to comment Share on other sites More sharing options...
Rich.2211 Posted November 24, 2012 Share Posted November 24, 2012 Just a thought.. is the colour going to be difficult to match? As for the headlights, I'd stick with Supra headlights but maybe split them and paint the inserts Link to comment Share on other sites More sharing options...
Guest cliogerbil Posted November 24, 2012 Share Posted November 24, 2012 i think if i'm going to change them then it will have to be something roundish to keep the shape right. the myth with this paint is that you have to do a whole respray if you damage it. It can be done panel by panel though....you just can't blend in Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now