ADD Posted September 28, 2012 Share Posted September 28, 2012 Chaps, I have bottled out of fitting the uk brakes to my car and got a good garage to do it. Prob is one of the front and rear callipers are leaking were the flexy hose screws into the callipers, apparently the surface is pitted badly so they are gonna put new copper washers in and see how it goes. Has anyone come across this before? Cheers Ad Link to comment Share on other sites More sharing options...
BOB B Posted September 28, 2012 Share Posted September 28, 2012 Yes I've had it, I have UK brakes and sometimes they split on the casting at that exact spot, especially if they have been over tightened, if you have the car up and you get under the rear of the calliper and shine a good light on it you can see it seeping out the crack. It could also be the washers so see how it goes after new ones have been fitted, fingers crossed. Link to comment Share on other sites More sharing options...
ADD Posted September 28, 2012 Author Share Posted September 28, 2012 Bob I did think that, but they said it all looks in tact. So as ya say fingers crossed. Thanks for help pal Link to comment Share on other sites More sharing options...
DaveR Posted September 28, 2012 Share Posted September 28, 2012 Sorry to hear you're having issues matey. I'm sure some shiny new washers will square that away though - there was never any sign of leaking before... Link to comment Share on other sites More sharing options...
ADD Posted September 28, 2012 Author Share Posted September 28, 2012 Cheers Dave, it's ok mate all will be ok fingers crossed Link to comment Share on other sites More sharing options...
garethr Posted September 28, 2012 Share Posted September 28, 2012 You can always try annealing copper washers. Heat to cherry red and quench in cold water. Link to comment Share on other sites More sharing options...
ADD Posted October 3, 2012 Author Share Posted October 3, 2012 New washers have worked, picking the car up later today. Cost £270 to fit in the end Link to comment Share on other sites More sharing options...
Chris Wilson Posted October 3, 2012 Share Posted October 3, 2012 £270 quid? Oh dear.... Why didn't they machine or even file the pitted areas flat? Or use Dowty seals? Oh dear..... Link to comment Share on other sites More sharing options...
Dnk Posted October 3, 2012 Share Posted October 3, 2012 £270 Link to comment Share on other sites More sharing options...
Big Mark Posted October 3, 2012 Share Posted October 3, 2012 I've got a small brake fluid leak but not sure where from yet, just that I need to top up every couple of months. Car goes in to Toyota on Saturday for their free 37 point visual inspection so maybe they will spot it. Link to comment Share on other sites More sharing options...
supra steveo Posted October 3, 2012 Share Posted October 3, 2012 £270 your having a tin bath i would of done it for a cold can of mountain dew lol Link to comment Share on other sites More sharing options...
ADD Posted October 3, 2012 Author Share Posted October 3, 2012 I know I'm absolutely gutted! And to top things off, the car has this annoying vibration from exhaust not under the car Always something. Feel like a complete Mug! Link to comment Share on other sites More sharing options...
spikedjack Posted October 3, 2012 Share Posted October 3, 2012 I'd have fitted them for a pack of Budweiser, ouch! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now