Jump to content
The mkiv Supra Owners Club

Complete 1JZ-GTE 2.5TT Engine - ECU - LOOM, all to fit into MKIV


little num

Recommended Posts

Hi folks as many of you know i have installed a 1JZ - GTE 2.5TT engine into my own mkiv.

As the non turbo engine just wasent quick enought for me :) and couldnt afford to put a 2JZ - GTE in.

Since i did this i have been buying 2.5tt soarer's just for the running gear and now i have a few complete setups ready to sell as i have just bought another 2 soarers and need the space in my garage.

So this listing is for virtually all parts needed to go TT.

 

ENGINE - TURBO'S (MINT) - ALL ENGINE PARTS AS IT WAS IN THE SOARER - LOOM - ECU - DOWN PIPE (THAT BOLTS DIRECTLY TO YOUR 2ND CAT OR DECAT) - SOARER SIDEMOUNT INTERCOOLER - ALL INTERCOOLER PIPES - DRIVERS TOWING EYE WITH BRACKET WELDED FOR COOLER - AUTO THICK RAD WITH COWLING - AUTOBOX IF GOING INTO A SUPRA AUTO.

 

Now i will also include info on how to get the engine running in your mkiv and also what parts you need from the 2jz engine like mounts and fuel regulator ect.

 

So this kit basically comes complete with virtually all parts needed to convert your N/A into a REVVY TWIN TURBO, that is capible of BPU figures 380hp easy.

 

Collected from my address (hoist here if needed for loading) without autobox £800 with box £850.

 

LINK WITH THE SAME ENGINE IN MINE

Link to comment
Share on other sites

  • 2 weeks later...

I would be willing to fit the conversion if you required it and supplied the new clucth and other parts that you may need, this engine fits directly to your W58 but you will need a better clutch, what people dont realise that this kit isnt just for the bits its also for my information and information is the biggest help you can buy lol.

And yes you can buy soarers for £1000 but beleave me its going to cost you alot more when the turbo's blow as they havent been checked or looked after.

With all my kits i personally take the turbo's off and get them checked over to make sure they are in perfect working order, As the exhaust blades are made from ceramic they have a tendancy to be missing.

And my info makes the engine swap alot easier as i tell you what you need from your old engine for the new 1, and how to wires it up so you get it running.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.