Will faclift dash panels fit in a non facelift cars?

[JamieP]

Asking as the faclift stuff has a pod where the speedo goes, this would work well with my new display im thinking.

[Jake]

No mate, they're all different. Well, possibly the gear lever one is the same but none of the others.

 

 

BTW, I had a missed call from you yesterday but I didn't see it til hours later. Nothing important I hope?

[Jake]

Just to make myself clear.... I believe the panels would physically fit in place of the pre-facelift ones as long as you changed the whole set. You'd want to retain the pre-facelift top section (Odo etc) though.

[JamieP]

 

 

BTW, I had a missed call from you yesterday but I didn't see it til hours later. Nothing important I hope?

 

Ill pm ya mate.

[Nic]

Asking as the faclift stuff has a pod where the speedo goes, this would work well with my new display im thinking.

 

The main dash section is the same on all models, so as Jake says, if you replace all the panels then they should fit, not sure whether the upper warning light modules will fit to the back of the facelift upper dash panel, they look the same though from what I can tell.

 

Hope you don't mind me using this pic of your Pete.

 

http://img382.imageshack.us/img382/745/picture5au7.png

Edited August 27, 2008 by Nic (see edit history)

[Pete]

Hope you don't mind me using this pic of your Pete.

No worries.

[marc_p]

The main dash won't fit, I have a pre facelift and I put a facelift panel in it and it doesn't line up at all at the top, also the clock is a different size so you can't have a clock either.