Zofix Posted July 5, 2008 Share Posted July 5, 2008 I made it to the point where you need to relocate the power steering cooler. How come the supplied power steering cooler line is so long? I know it needs to go from the tank down to the left air duct but there is still 1m more, is there something I did wrong? Where do I Remount the ambient sensor? I can't see any brackets for that? Could anybody please show me a photo or anything that could help me! Thanks! Link to comment Share on other sites More sharing options...
stevie_b Posted July 5, 2008 Share Posted July 5, 2008 GReddy Link to comment Share on other sites More sharing options...
Nic Posted July 5, 2008 Share Posted July 5, 2008 Do you have the installation instructions? If not see attached.765.pdf Link to comment Share on other sites More sharing options...
Zofix Posted July 5, 2008 Author Share Posted July 5, 2008 Do you have the installation instructions? If not see attached. Thats for the GReedy 3-row m8 Link to comment Share on other sites More sharing options...
mwilkinson Posted July 5, 2008 Share Posted July 5, 2008 The PAS oil cooler was straight forward with the intructions giving you the required lengths to the PAS reservior and rack. The ambient temp sensor can be cable tied to a number of front support structures. It wont ever look pretty though, so don't get too hung up over thant. Do you have the correct instructions? Link to comment Share on other sites More sharing options...
Zofix Posted July 5, 2008 Author Share Posted July 5, 2008 Yes thanks, now I just have a hard time making the GReedy intercooler pipes fit... Do anybody have a photo where the A/C lines are relocated right under the throttle? Link to comment Share on other sites More sharing options...
Nic Posted July 5, 2008 Share Posted July 5, 2008 Yes thanks, now I just have a hard time making the GReedy intercooler pipes fit... Do anybody have a photo where the A/C lines are relocated right under the throttle? GReddy, 1 x e and 2 x d http://www.d-sign.co.uk/images/logos/big/GReddy.jpg Link to comment Share on other sites More sharing options...
Zofix Posted July 5, 2008 Author Share Posted July 5, 2008 Hehe I got it GReddy! But I still have problems fitting the IC pipes, they don't fit at all.. I need to relocate that hard tube, it is in the way, but how? I still have 1 more bracket, and in the guide it says relocate the A/C tube, but I have no idea how to do it or where to locate it. I don't want to push or press the tube, if I break something:( Hope you can help me with a photo or just anything.. Link to comment Share on other sites More sharing options...
dibbleyuk Posted July 5, 2008 Share Posted July 5, 2008 I didnt have any problems fitting mine, thats strange. Link to comment Share on other sites More sharing options...
Zofix Posted July 5, 2008 Author Share Posted July 5, 2008 Did you relocate the A/C recharge tube? Link to comment Share on other sites More sharing options...
mwilkinson Posted July 5, 2008 Share Posted July 5, 2008 (edited) Basically you need to be a bit brutal with the pipes, dont break them but you will have to move them slightly down from their original loaction in order to properly fix the bracket. If my memory serves me right the new bracket fits up on the engine side of the main support and the top of one of the A/C pipes connects to the bottom of the same bracket. But as alredy mentioned you have to push the pipes from their original location to make them fit. Edited July 5, 2008 by mwilkinson (see edit history) Link to comment Share on other sites More sharing options...
Nic Posted July 5, 2008 Share Posted July 5, 2008 Patrick, see photos attached, these are of a customers car with a GReddy Spec M fitted FMIC. Link to comment Share on other sites More sharing options...
Zofix Posted July 5, 2008 Author Share Posted July 5, 2008 Thanks Nic, I allready seen those photos, they dosent show how the pipe is relocated... This is the pipe I'm talking about Marked with red roundings. Link to comment Share on other sites More sharing options...
Zofix Posted July 5, 2008 Author Share Posted July 5, 2008 (edited) Have no idea what to do, do these 2 pipes need to go above or under the IC pipe? Edited July 7, 2008 by Zofix (see edit history) Link to comment Share on other sites More sharing options...
Zofix Posted July 5, 2008 Author Share Posted July 5, 2008 I also have problems fitting the first pipe right over the air box, do anybody know if it possible to run stock air box with this intercooler kit?:'( Link to comment Share on other sites More sharing options...
Zofix Posted July 5, 2008 Author Share Posted July 5, 2008 bump? /vbb/images/smilies/bbcode_sad.gif Link to comment Share on other sites More sharing options...
RobSheffield Posted July 5, 2008 Share Posted July 5, 2008 I put those pipes OVER (carefully unbolt them from the car) AFAIK its NOT possible to run stock airbox with this kit. Link to comment Share on other sites More sharing options...
Zofix Posted July 5, 2008 Author Share Posted July 5, 2008 I put those pipes OVER (carefully unbolt them from the car) AFAIK its NOT possible to run stock airbox with this kit. Please tell me that is not true.. Link to comment Share on other sites More sharing options...
RobSheffield Posted July 5, 2008 Share Posted July 5, 2008 It actually states on the website, and is mentioned a fair few times on here that it wont fit. IIRC there is one of the Greddy pipe kits that will fit. Link to comment Share on other sites More sharing options...
Zofix Posted July 5, 2008 Author Share Posted July 5, 2008 I know that the GReddy 3-row kit fits with stock air box, because its written in the manual, But I'm not sure about this Spec-M because it dosent seem to fit:( Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now