ADL Mark Posted January 22, 2008 Share Posted January 22, 2008 It is with deep regret that I'm going to have to sell my single turbo kit before I've had a chance to fit it. Due to an unfortunate change in circumstances I need to get some cash back to cover being off work for the next few months and this is something I can look to do again when I'm able. I bought this kit from Dusty at MVP and it was all delivered in September and has since been sitting in the way on my dining room floor. It had a couple of lines and fittings missing when it arrived, but Joe at PHR has been great in helping out and these bits are winging their way to me from the US as we speak. He's also been kind enough to include an oil return fitting that is needed for the kit to fit RHD cars without any trouble. I've also got a UK 1st decat pipe to go with the kit so this will fit straight up to any UK or JDM cars no problem. You just need to supply the fuelling and the ECU. More info at PHR here - http://www.powerhouseracing.com/Templates/frmtemplateM7.asp?SubFolderID=25&SearchYN=N which should tell you all you need to know about the kit and what it can achieve. I have detailed photos of everything in the kit, so if there's anything you want to see then please ask for a picture. I think I posted most of them on the thread I posted when I first got the kit here - http://www.mkivsupra.net/vbb/showthread.php?t=126912. I'm looking for £2000 for the whole lot including the UK 1st decat. This is a small saving over a kit direct from the US, and saves the wait and import duty when it gets here (think I got stung for about £90 duty). Plus it's all ready and in the country I'm afraid this is collection only as it all weighs quite a bit and I don't have the big box it all came in any more, it was taking up too much space. Couple of pics: http://www.i-macca.co.uk/temp/singleconversion/Single-wholekit.jpg http://www.i-macca.co.uk/temp/singleconversion/Single-turbo2.jpg I'm located down in Hastings, East Sussex. Please PM me if I can help with more pictures and/or information, thanks. Link to comment Share on other sites More sharing options...
uzthedentist Posted January 22, 2008 Share Posted January 22, 2008 is this brand new matey Link to comment Share on other sites More sharing options...
supradibbs Posted January 22, 2008 Share Posted January 22, 2008 Joe took me out in in the phr street kitted supra very impressed i will upload the vid Link to comment Share on other sites More sharing options...
uzthedentist Posted January 22, 2008 Share Posted January 22, 2008 yhpm Link to comment Share on other sites More sharing options...
bignum Posted January 22, 2008 Share Posted January 22, 2008 Thats a shame, i was looking forward to seeing this up and running, good luck with the sale. Link to comment Share on other sites More sharing options...
supradibbs Posted January 23, 2008 Share Posted January 23, 2008 here you go guys http://www.mkivsupra.net/vbb/showthread.php?p=1776693#post1776693 Link to comment Share on other sites More sharing options...
ADL Mark Posted January 23, 2008 Author Share Posted January 23, 2008 PM's replied to. Bignum, it'll still happen but I'll have to wait a few months until I'm back to work and have some available cash. Link to comment Share on other sites More sharing options...
ADL Mark Posted January 23, 2008 Author Share Posted January 23, 2008 And thanks Wayne, good bit of advertising Link to comment Share on other sites More sharing options...
kieren1234 Posted January 23, 2008 Share Posted January 23, 2008 here you go guys http://www.mkivsupra.net/vbb/showthread.php?p=1776693#post1776693 500bhp on stock fueling and stock ecu - WOW. didnt think that was possible. Link to comment Share on other sites More sharing options...
Joeatphr Posted January 23, 2008 Share Posted January 23, 2008 I will vouch for this kit being brand new and not been fitted yet. As you can see in the video that this kit is very impressive and this was on stock MAF, Stock ECU, Stock Fuel. There were no other mods other than Single Turbo, HKS Supper Dragger and Random Tech Downpipe. Jump on this deal while it last, not to often something like this comes along. Cheers, Joe Link to comment Share on other sites More sharing options...
ADL Mark Posted January 23, 2008 Author Share Posted January 23, 2008 I really didn't think it would be possible to run this turbo on a stock ECU, how was the fuelling? Thanks for the kind words Joe Link to comment Share on other sites More sharing options...
Joeatphr Posted January 24, 2008 Share Posted January 24, 2008 I really didn't think it would be possible to run this turbo on a stock ECU, how was the fuelling? Thanks for the kind words Joe a little bit rich but still ran good! Link to comment Share on other sites More sharing options...
colsoop Posted January 24, 2008 Share Posted January 24, 2008 Very cheeky but if you don't ask you don't get. I will offer you all the money in my piggy bank which is £1600. (assuming you can pop it in a box so i can arrange a courier). Link to comment Share on other sites More sharing options...
ADL Mark Posted January 24, 2008 Author Share Posted January 24, 2008 Sorry colsoop, I'd rather hang on to it and struggle than lose that much on it. I appreciate you having a go though Link to comment Share on other sites More sharing options...
p111ddy Posted January 24, 2008 Share Posted January 24, 2008 Out of interest how much work would be involved in fitting this to an N/A please? As I'm going TT or Single but very interested in the single route Link to comment Share on other sites More sharing options...
ADL Mark Posted January 24, 2008 Author Share Posted January 24, 2008 I'm pretty sure this won't fit an N/A at all unfortunately. Apart from anything else the dizzy is in the way, but I think the manifold might be a different pattern as well? Somebody with some more knowledge might have to confirm though.. Link to comment Share on other sites More sharing options...
Terminator Posted January 25, 2008 Share Posted January 25, 2008 a little bit rich but still ran good! Dont forget the US stock motor is virtually the same as the UK spec supra, so has 256 cams and 550 injectors. Link to comment Share on other sites More sharing options...
imi Posted January 26, 2008 Share Posted January 26, 2008 PM'd Can you reply back with your postcode? Link to comment Share on other sites More sharing options...
ADL Mark Posted March 3, 2008 Author Share Posted March 3, 2008 Bump, price dropped to £2000 Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted March 3, 2008 Share Posted March 3, 2008 Can't believe this hasn't sold Link to comment Share on other sites More sharing options...
heckler Posted March 4, 2008 Share Posted March 4, 2008 God dammit, if this was may/june time i'd have it off you! Link to comment Share on other sites More sharing options...
ADL Mark Posted March 4, 2008 Author Share Posted March 4, 2008 The way it's going, it'll still bloody be here Link to comment Share on other sites More sharing options...
ADL Mark Posted March 4, 2008 Author Share Posted March 4, 2008 Just to add now that all the parts are now here from the US so it's a ready to go kit, including the adaptor needed to fit it to a RHD drive car, and also the UK first decat which means it will fit straight up to any UK or J-Spec car without any faffing about. Link to comment Share on other sites More sharing options...
Sharpie Posted March 4, 2008 Share Posted March 4, 2008 I will vouch for this kit being brand new and not been fitted yet. As you can see in the video that this kit is very impressive and this was on stock MAF, Stock ECU, Stock Fuel. There were no other mods other than Single Turbo, HKS Supper Dragger and Random Tech Downpipe. Jump on this deal while it last, not to often something like this comes along. Cheers, Joe Joe, is there any reason why Dusty's website says that you have to remove the MAF and go MAP with this kit ? (your site does not and you state above that you ran it on a car with MAF) This system, as with any real turbo kit, requires you to convert your Supra to speed-density and remove your Mass Air Flow. http://www.mvpmotorsports.com/Templates/frmTemplateM7.asp?SubFolderID=211&SearchYN=N Just to be clear on the issue. Thanks Link to comment Share on other sites More sharing options...
imi Posted March 4, 2008 Share Posted March 4, 2008 Joe took me out in in the phr street kitted supra very impressed i will upload the vid Who Joe? From what I have read, a proper single setup is atleast twice or three times the cost of the single kit - so any pointers as to what Joe is running would help. Link to comment Share on other sites More sharing options...
Recommended Posts