alibabba

Can anyone confirm if the facelift center caps of the facelift oem 17 inch wheels are the same as the 16 inch center caps? In design and fitment please. I'm having trouble finding 17 inch facelift caps. Pic for reference: https://i.ytimg.com/vi/CjklAFflhrM/maxresdefault.jpg

Are they really that bad? Lots of people on this forum are using these intercoolers. However I can't find any topics on these on supraforums.com.

Hi guys, As the title says, what are the differences between these three intercoolers beside the end tanks. If I'm not mistake the ETS uses a bar and plate design, and they have an offset between the fins. What about the SRD and Whifbitz cores? Do they use a Garret core?

Chris how do you rate the KW V3 coilovers?

I would use a stock denso USDM pump.

I agree with Jot_ie, your front wheel will stick out. In those sizes your best bet would be 18x10 et42 and 18x11.5 et50.

They will poke past the fenders. Flush fitment with cut/rolled rear fenders. 9.5 et36 11 ET42 Please don't ruin your supra with stretched tyres and negative camber. I will look horrible.

This car used to run 15 inch wheels all around. It was John Pratkanis 8 second supra. http://i296.photobucket.com/albums/mm175/Jpolo975/IMG_1593.jpg?t=1222378566

US figures are not different than ours. Plenty of Supras in Europe match spec and output (RWHP and 1/4mile). Just get a good setup and tune®. For some reason you UK guys are always doubting their numbers.

Sorry for bumping an old thread. But I'm looking at a similar setup. Are the 2 auto box coolers place in front of each other, between the radiator and the fmic? How is the cooling? Is there any room to place one in the position of the smic?

I'm curious is someone replaced the stock boost gauge (facelift dash) with an aftermarket one in the stock location? I don't want to lose the clock. Pictures would be helpfull. TIA

Anyone got experience with these brakes? I've seen numerous Supra's with them on the internet, but there is quite a lack of reviews about these. A lot seem to use the Jeep Grand Cherokee SRT8 6 piston front and 4 piston rear calipers. How do these compare to the UK brakes and other BBKs (Brembo, AP etc).

Anyone got an update?

Great idea! I would love to do this. How many screws do you need?

Share your story here: http://www.supraforums.com/forum/showthread.php?990361-What-is-your-experience-with-Suprastore/page3 This way you are sure Mark gets to see it. You can also mail him at [email protected] (owner). Good luck!