richarde7927

Its fitted to the front turbo nearest the rad , so if that is the first turbo how is the controller working the second turbo to get you the 1.09 bar that its doing at the min its fit the same as this link show you . http://www.mkiv.com/techarticles/avc...ll/diagram.jpg Rich.

The spike stop is set to 0 as i have just been out for a look have me excited for a min . you are right over the port orders what you are saying is how it is on the car and how it says it should be in the instruction book . Rich.

I have a look at that i know there is one in there from when i did the clutch . what size is the hole in the middle of the ring for a 1 bar ring . Rich.

That first link i found that on the internet myself and set is up as i could not figure out how to set the boost at all with the manual , but as that link says take the car up the road 3rd and 4th gear flat out and then adjust the duty till you have boost you want , as for the open and closed loop , its on the closed loop for sure ,as if its on open it only run's 0.9 bar . the controller is now maxed out at 90% duty and 15% gain and im only making 1.09 bar . you can here the solenoid working clicking on start up so i think that is working. at 10% duty its running 1.03 bar so the controller only moves the boost from 1.03 to 1.09 bar from min to max on the controller surely this cannot be right . This is driving me crazy as there is no reason this should not work as everything is wired and piped up wright and i have check all the pipes for leaks or ill fitting pipes (for the boost controller ) which has made no differance . Rich.

Thanks for all the help and info , but its is piped up the same as the links i have been sent , and the controller in the car works fine you can adjust every thing but it is making no differance to the boost levels of the car , so it can only be the solenoid thats not working . Rich.

Thank you for the links , the first link is how my car is set up , but in the second link it says you need to remove pipe 1 off the solenoid to runs up to the metel hose and the cap at the ends . mine does not have this the pipe is still connected at both ends so with link is right . Rich.

Hello all I have a gizzmo ms-ibc boost controller and its was fitted in the car when i got it back in feb of this year . The problem i have is it does not seem to do anything , I could not find anywere in the handbook how to adjust the boost setting ,but after some reading this is how it works . You run flat out in 3rd and 4th , pull over , and the controller will display your highest boost , then you increase the duty to increase the boost , but here is the problem a 10% duty im running 1.03 bar and at 90% duty im only running 1.08 bar . Any ideas what the problem is ? the solenoid is running off the compresser housing and going to the actuator of the second turbo is this right ? Rich.

This is now sold , so mods can now remove , cheers Rich.

Well done on your win mate you do have one clean car there , but can i just say its japshow not japfest may get you more hits on your thread , Rich.

If there is no pictures it did not happen :). I glad you are ok ,i would be so pissed off if it was my car . Rich.

I have someone interested at the min and they are willing to collect so ill let you all know if things do not work out . Rich.

Hello and welcome to the forum . Rich.

So i was about right in the first place then , although there is pressure it does not mean it air con gas , do you use your air con in the winter . with the heaters , its best to use it when you can as the system has oil in it and by using it it moves the oil around and stops the seals from drying out a leaking out the gas , plus it as de mists the windows loads faster than the heaters on there own . Rich.

im only running in 3rd and 4th like you say you need a private runway for the 5th and 6th gear pulls . Rich.

After this weekend im thinking the same thing for pod next weekend , but they do not like you having spray bars as it wets the track . you can use them there but you have to be dripping no water by the time you get to the front of the line to race . are there anyother systems out there ie a gas system . Rich

The intercooler is brand new fitted it about 4 weeks ago (front mount ) Rich.

I have been running 1.15 bar since i have had the car but i went for run yesterday and today and im only running 1.05 bar now is this due to the heat ? Rich.

Ok people £100 posted anywere mainland uk , im sure you will not get a better deal than that . Rich.

You have a deal , i have pm you my details . Rich.

I cannot wait its about the only thing i look forward to seeing on the tv . Rich.

Cool as i feel like i have been waiting for ever . Rich.

Yes its the motor part that will not fit if you have a from mount , i would have put the spoiler its self back on but im after a new spoiler / splitter to replace the old one . You will be able to bolt it at the ends ,but there will be nothing in the middle to to surport it so the spoiler will aways be down . Rich.

Anyone open to offers . Rich.

Anyone open to offers . Rich.