Jump to content
The mkiv Supra Owners Club

RICHARDA

Club Members
  • Posts

    1022
  • Joined

Everything posted by RICHARDA

  1. Shaf, where did you get that one from? Ta Rich
  2. You could try t-cut on these tar like spots, it has worked for me on wheels before. HTH Rich
  3. Sorry for you Dibbs, Royal Snail eh:mad:
  4. Millhouse, I would like another stock one, do you know where I can get one? Many thanks Rich
  5. I have jet washed mine loads of times. I found a good tip is to put/wrap plastic bags (tesco bags etc) round anything that looks electric and vunerable. I know this is not specific but there is plenty of electrics under there. Just remember to remove them afterwards. HTH Rich
  6. I have the same one in Silver, bought it second hand for a tenner! Can you get any more 1/18th Supras that are not F&F ones? Ta Rich
  7. Looks like cheap turbo charged fun to me:)
  8. This is what has happened to me, it sounds like the starter motor relay sticking. I believe you can get a refurb kit from Toyota or buy an exchange unit from them as I did. Mine started sticking through a lack of use too. HTH Rich
  9. Its not something I am proud to admit but I work part time at Kwik fit whilst I am studying my 2 year Btec Nat Dip in Vehicle repair and Technology and I would strongly suggest not to leave the Supe in their hands. As for the pads they will more than likely be using patent pads from the likes of part co etc. HTH Rich
  10. Sorry to be a dumbass but what method did you use to drain off the excess? Ta Rich
  11. Cripes, thanks for the pics, how do you block off the fluid from the PAS resovoir? Ta Rich
  12. Can anyone please advise on the removal of the following for polishing purposes? 1. Power steering fluid resovoir. 2. Throttle body 3. Turbo pipework 4. Turbo heat shield Are these simply unbolt affairs / any gotchas to be wary of? Many thanks Rich
  13. Have you thought of running a daily shitter? I know my 1.0 micra has saved me a packet whilst the Supe stays in the garage in tip top condition, ready and waiting for the sunny days. I think quite a few people run cheap second cars. HTH Rich
  14. Try and also put some money aside for the unexpected expenses(or mods). HTH Rich
  15. Hi chaps Wonder if anyone can help. I have bought an aftermaket steering wheel & boss kit but can't get the horn to work. I have three white wires that can be attatched to the back of the steering wheel where there are two connectors. One of the wires when pressed against the metal on the inside of the boss will sound the horn, but when I attach it to a connector on the back of the steering wheel nothing happens. Have I got the right wire(s) or do I have an earthing prob? Any suggestions? Many thanks Rich
  16. Good, name & shame! I hope you get sorted.
  17. Geeza, was it easy to install the cruise part? Plug & play? Ta Rich
  18. Ok chum, sorry I can't help. What is the green plastic holder?
  19. Mine is also on from changing the o/e airbag wheel to a non airbag aftermarket one. Can't you just pull the bulb? Ta Rich
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.