mikerunner

sounds good to me, my cars only for weekend pleasure so im not in big panic, just rob the mrs car for bit she dont mind.

bit odd tho how we have exact same problem with same part. my garage dont think theres a problem with slave cylinder, they even said they re bleed it. and still problems. im not a machanic tho and dont fully understand operation, im hoping your problem is the same as mine and its easy fix thanks for your help dude, would be stuck without ya. m

ill wait to here how you get on then.

thanks dude appreciate it, feeling better about situation, your always great help, thanks

yeah they deff fitted it right, good garage i went to. dude is having same problem with a southbend clutch, so def a fault with it, My problem now is, if it is faulty clutch i have to pay for clutch to be taken out and then put back in again, so 3 times the charge of replacing clutch. ££££££££££££££££££££££££££££££££££££££££££££££££££

its tt 6 speed think dude is having same problem, think its a problem with clutch some how. waiting to here back from manufactures

clutch is engaged all the time no matter how much clutch is pressed. the clutch plate is touching the flywheel and cover even tho clutch is to the floor. only minimal, if its in gear and clutch is down car creeps forward thats what garage are saying

gonna phone garage now get more info, could it be wrong clutch was sent is there many different clutch fitments for supra

just had aasco flywheel fitted and southbend clutch fitted and its dragging, clutch wont release. garage said they tried everything arrr

hi all i have just had clutch and flywheel fitted how long to bed in, read somewhere 400 miles under 3 thou revs that sound right thanks

hi all have bought southbend clutch but doesnt come with snap rings does anyone have part no. for stock thanks

hi all i am going to change power steering fluid and read Dexron III oil is the stuff to use. how many litre's do i need? thanks

hi all, i am having trouble finding gearbox oil for my 6 speed tt. i have checked prevous threads which reccormend the following Manual 6-speed V160/161 Gearbox Stock = Toyota V160 oil (PART No. 08885-01306) Capacity 1.8l's when dry Toyota V160 Oil (comes in 1L cans - require 2 cans) Alternative: Esso Dextron D21065 - R34 Skyline has same box and uses this, however this too is in short supply BMW oil called MTF-LT-1 or LT-2 - Feedback required from testers Castrol Transmax Z - Feedback required from testers Royal Purple SynchroMax - Feedback required from testers Mobil ATF 220 - Feedback required from testers I recommend you stick with stock but in recent times this has been hard to get hold of, so it's the Esso now... Interval = 2 Years / 30,000miles depending on use/power levels but i can not find any of these oils. can someone suggest where i should go to buy and which one i can get. thanks

need uk spec brake fluid botle

re type. and it does not have an adaptor to fit on my brake fluid bottle.

went to change my brake hose's for do-luck and found my bleed nipples rusted in. probably gunna muller them taken out so need new nipples and bought an eezibleed kit and it does have an adaptor to fit on my brake fluid bottle, because i have import. so woundering if anyone knows where i can get an adaptor or a kit that has the right adaptor for jap import. thanks

can i drop 550cc injectors with fuel rail and ecu from uk spec tt into a jspec tt. or will i need resistor pack thanks

front right cracked. so not sure weather to get sumopower front set from ebay at £63.50 or buy full set of goodridge braided hoses from whiftbitz for 62.10

my brake hose has crack in it anyone no rough cost for set. thanks

thanks bud i have 550cc injectors and rail ready to put in my full bbu j spec tt manual, was gunna fit with a uk spec ecu. i got auto uk ecu, second hand but only realised it was auto after buying.

i take it theres i difference between the auto ecu and manual ecu??

have checked tyre pressure and checked shocks, replaced springs and still lower on one side. very odd.

oh and how much you pay for southbend, thought they where usa based so thought shipping time be long

how long did it take to get southbend

where can i get a Southbend DXD clutch from. flywheel i heard bout £300 that right