Sharpie
-
Posts
5345 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Sharpie
-
I found a few spares in my Nuts & bolts box that were left over. They are 8mm bolts with a hex end and the nuts take a 13mm spanner to tighten up. The Sparco bolts are also 12.9 SFA approved. A few pic's.. (Looks like the ebay link will do the job)
-
OK, if you are in a rush, I'll go out to the garage now....give me 10mins.
-
http://www.mkivsupra.net/vbb/showpost.php?p=1975803&postcount=2
-
Out at sea... Pikey is a Southern word We use Gypo's
-
I say bring on the Manchester Bobber!!!! http://www.manchesterbobber.com/
-
Are you talking about Side mount to seat OR Side mount to floor ? I used the Sparco hardware kit http://www.sparcousa.com/pseats_acc.asp?id=538 which, I assume is universal so, can check for you tomorrow on my seats. If it's Side mount to seat I have Milano's with the flat seat base. http://www.mkivsupra.net/vbb/attachment.php?attachmentid=14417&d=1113674710
-
0.91 bar (max) for my UK auto, with FCD and D-Decat and exhaust. Nothing more even with very cool external air temps.
-
size - small - LOL
-
others can be found here: http://clothing.cafepress.com/item/daddys-supra-girl-bib/90133542 http://images.cafepress.com/jitcrunch.aspx?bG9hZD1ibGFuayxibGFuazo3M19GLmpwZ3xsb2FkPUwwLGh0dHA6Ly9pbWFnZXMuY2FmZXByZXNzLmNvbS9pbWFnZS8xNjAyNjE4NV80MDB4NDAwLmpwZ3x8c2NhbGU9TDAsMTU1LDE1NSxXaGl0ZXxjb21wb3NlPWJsYW5rLEwwLEFkZCwxNjIsMjMyfGNwPXJlc3VsdCxibGFua3xzY2FsZT1yZXN1bHQsMCw0ODAsV2hpdGV8Y29tcHJlc3Npb249OTV8
-
I thought this was the Technical section ?
-
very brave, take care & get well soon.
-
Nice to meet you last night Rich and thanks again for the seats!
-
J spec VVTI is also MAF.
-
Paypal'd for the seats Rich Will call next week to pick up.
-
Help configuring Apexi SAFCII to lean out rich spots
Sharpie replied to Pabs's topic in mkiv Technical
Not a technical reply but... I'm sure you know that most people these days go for the EMB/EMU at this end of the market but, the SAFC was the unit of choice a few years back. So, your looking for one of the more longer standing members here to help you out....if they have not already moved on from this unit. It might be worth paying a couple of hundred to get a tuner to map it for you and they can help you understand it a little more ?? Just one of the traders: http://www.thor-racing.co.uk/Fuel_Controller_Installat-AFC_Install.asp -
It's always nice to see pic's of your car Trig
-
For bits and bobs like eye bolts http://www.demon-tweeks.co.uk/products/ProductList.asp?cls=MSPORT&grp=MP231&pgrp=M017&tlgrp=MS005 is a good place to start.
-
Take a look here http://www.mkivsupra.net/vbb/showthread.php?t=36741 as it answers some of your questions. I got the mount from Dusty at MVP but, Lifeline might do one ?
-
Hi Rich, I'm just trying to find a free spot when I can come over
-
How much did they say the parts were ?
-
They should like nice behind your rims
-
It would be fun to press the button on the trap door when they don't expect it
