Guest mossy86 Posted November 30, 2007 Share Posted November 30, 2007 Ok ive ordered my new boot rubbers should be here on Monday so whats the best tried & tested way to change them?? Thanks Link to comment Share on other sites More sharing options...
Jamesy Posted November 30, 2007 Share Posted November 30, 2007 get a garage to do it. Link to comment Share on other sites More sharing options...
Guest mossy86 Posted November 30, 2007 Share Posted November 30, 2007 ah it cant be that bad can it? Link to comment Share on other sites More sharing options...
Ady Posted November 30, 2007 Share Posted November 30, 2007 Its only a few bolts man - hardly a job for the garage. Have a crack bar on hand and a decent rachet set. Link to comment Share on other sites More sharing options...
Jamesy Posted November 30, 2007 Share Posted November 30, 2007 ah it cant be that bad can it? PLEASE do me a favour and post up a thread after you've done it to see how easy/hard you found it dude Link to comment Share on other sites More sharing options...
peter richards Posted November 30, 2007 Share Posted November 30, 2007 do a search guys this has been done loads of times , there is a how to do it on here somewhere , tools needed and all that Link to comment Share on other sites More sharing options...
MRX Posted November 30, 2007 Share Posted November 30, 2007 Have a drill handy... Link to comment Share on other sites More sharing options...
peter richards Posted November 30, 2007 Share Posted November 30, 2007 the screws are glued in , so cut away the fooked rubber bits , get a small heat torch heat the screws and melt the glue , they should come out now. replace with the new Link to comment Share on other sites More sharing options...
Ark Posted November 30, 2007 Share Posted November 30, 2007 Bah, don't get so dramatic. Half of us who've tried, found they came straight out with a phillips screwdriver. Link to comment Share on other sites More sharing options...
Guest mossy86 Posted November 30, 2007 Share Posted November 30, 2007 Rite sound i'll give it a go then, ill let ye know how I get on.... Link to comment Share on other sites More sharing options...
Stevo Posted November 30, 2007 Share Posted November 30, 2007 Link to comment Share on other sites More sharing options...
bondinho Posted November 30, 2007 Share Posted November 30, 2007 Did mine on Sunday and they came straight out no problem I even used two of the original ones to re-fit them as Toyota only ordered me 2 new screws Link to comment Share on other sites More sharing options...
RobSheffield Posted November 30, 2007 Share Posted November 30, 2007 Its only a few bolts man - hardly a job for the garage. Have a crack bar on hand and a decent rachet set. Have you done it yet? Link to comment Share on other sites More sharing options...
ivan Posted December 1, 2007 Share Posted December 1, 2007 It's about time this was covered by an FAQ guide. Link to comment Share on other sites More sharing options...
supra steveo Posted December 1, 2007 Share Posted December 1, 2007 my old ones had that blue prit stick locktight one so heated it with a mini blow torch and it came straight out Link to comment Share on other sites More sharing options...
Guest mossy86 Posted December 8, 2007 Share Posted December 8, 2007 Ok I done my boot rubbers today with great success, Took pics and all....will I do a guide as so many people have had problems doing this??? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now