dayosupra Posted October 9, 2007 Share Posted October 9, 2007 Hello people love the site its a great help and could do with some more!!:)bear with me please its a long story:) I came across a 93 manual supra tt in kildare Ireland imported from japan! for 11000euro had a look at it,basic BPU hks drager de-cat are filter BOV.I work for toyota as a panel beater and cars are my life especialy the supra i notice the car had a tip at the front b4 nothin too serious and had a ful pearl whit respray orignaly gun metal grey 1A1!!:)i noticed when i started the car white smoke came out 1 of the turbo's after shiting its self..i came along to see it and agreed to take it away for 8500euro! Long story short 6weeks of driving the turbo completely went and i noticed anytime i drove on the car it overheaded a bit due to a NA rad insted of a TT the next thing the bottom end went aaaaaaaahhhhh noooooo i was guted turned out to be from shity oil and neglit of serves oil blockages!! So i bought a Greddy T88 34d full kit it was farley cheap in japan arrived all good other engine mods i have here now are a jun syle air intake manifolt with a 100mm throttle body and fuel rail,haste radiator,fuel pressure regulator walbro fuel pump!!HKS cams 264 intake and 264 exchaust pulleys and t-belt:Pling: So heres where i need help on what size injectors,Conrods,full stand alone ecu,Head gasket,pistons and big end bearings with a brand new crank i need im lookin to run 600-700bhp ill post some ebay iteams i was looking at for reasonable money please let me know any info on the iteam quality thanks every1:) http://cgi.ebay.com/ebaymotors/Eagle-Connecting-Rods-ESP-H-Beam-Toyota-2JZGTE-Supra_W0QQitemZ110171097321QQihZ001QQcategoryZ33623QQrdZ1QQssPageNameZWD1VQQcmdZViewItem http://cgi.ebay.com/ebaymotors/Wiseco-Pistons-Toyota-Supra-93-98-2JZGTE-3-0L-8-5-CR_W0QQitemZ260160319004QQihZ016QQcategoryZ33623QQrdZ1QQssPageNameZWD1VQQcmdZViewItem http://cgi.ebay.com/ebaymotors/ARIAS-Turbo-pistons-2JZGTE-Supra-3-0L-87mm_W0QQitemZ260064818665QQihZ016QQcategoryZ33623QQrdZ1QQssPageNameZWD1VQQcmdZViewItem http://cgi.ebay.com/ebaymotors/93-98-TOYOTA-SUPRA-TURBO-MAIN-ROD-BEARINGS-2JZGE-2JZGTE_W0QQitemZ150168131054QQihZ005QQcategoryZ33619QQssPageNameZWDVWQQrdZ1QQcmdZViewItem http://cgi.ebay.com/ebaymotors/New-HKS-Forged-Piston-Kit-JZA80-JZS147-JZS161-2JZGTE_W0QQcmdZViewItemQQcategoryZ33623QQihZ019QQitemZ290037861234QQtcZphoto Link to comment Share on other sites More sharing options...
carl0s Posted October 9, 2007 Share Posted October 9, 2007 A '93 car would never have been originally gunmetal. Gunmetal is a facelift only colour. Link to comment Share on other sites More sharing options...
dayosupra Posted October 9, 2007 Author Share Posted October 9, 2007 Inside the engine bay i grey and inside the door cards and the paint code writen on the cars tag says 1A1 Link to comment Share on other sites More sharing options...
supradibbs Posted October 9, 2007 Share Posted October 9, 2007 I have heard bad things about eagle rods am pretty sure MVP sell them but saythey dont recommend them Link to comment Share on other sites More sharing options...
ivan Posted October 9, 2007 Share Posted October 9, 2007 Gunmetal is 6N0. I think you'll find that 1A1 is Brown (MSB?). Link to comment Share on other sites More sharing options...
carl0s Posted October 9, 2007 Share Posted October 9, 2007 Gunmetal is 6N0. I think you'll find that 1A1 is Brown (MSB?). Ah, that makes sense then. Link to comment Share on other sites More sharing options...
ADL Mark Posted October 9, 2007 Share Posted October 9, 2007 I don't know about in the Supra community but there's been a lot of questions in the GT-Four community about the strength of Eagle rods.. Link to comment Share on other sites More sharing options...
Gaz Walker Posted October 9, 2007 Share Posted October 9, 2007 I wouldn't be putting them in my car, I'm damn sure about that. Carillo please Link to comment Share on other sites More sharing options...
dayosupra Posted October 9, 2007 Author Share Posted October 9, 2007 Thanks guys yeah i think ill spend that bit extra on better rods!!any ideas on intector sizes and pistons etc Link to comment Share on other sites More sharing options...
dangerous brain Posted October 9, 2007 Share Posted October 9, 2007 Injector sizes are going to be relative to the power you expect to put down. Looking at that setup I am guessing around 850cc brand type is personal preference as I am sure theres a huge choice. . AEM is a reasonable budget/function standalone ECU thats great for the manual motor. Link to comment Share on other sites More sharing options...
dayosupra Posted October 10, 2007 Author Share Posted October 10, 2007 Yes the Aem is resonable priceded aswell and popular.ye 850 or 800 i was recomened any sugestions and what head gasket to run i herd alot run the factory toyota:innocent: Link to comment Share on other sites More sharing options...
dangerous brain Posted October 10, 2007 Share Posted October 10, 2007 Who is going to fit the gear for you? Usually tuning houses will recommend stuff themselves. Like everything in life usually you get exactly what you pay for. Buy cheaper brands mostly regret it, buy name brands with good reputations and you'll be OK or definitely warrantied better. If you are taking off the head anyways a few extra euro's for an uprated gasket and ARP studs is money well spent. Also consider replacing your valve stem oil seals whilst you are at it. I've just re-read your post and noticed you have bought a fuel rail already? You'll need to go with whatever injectors fit that rail really. Link to comment Share on other sites More sharing options...
dayosupra Posted October 11, 2007 Author Share Posted October 11, 2007 Im getting one of my mechanics in work to build the engine and the tuneing is being done by Martin Tracey big tuner in Ireland.I have a Hks style fuel rail lookin to run about 600-700bhp so what size injector would be recomend anyone????:) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now