ADL Mark Posted September 29, 2007 Share Posted September 29, 2007 Went up with a small car club I'm in today and had the car dyno'd, thought it would be nice to get a power figure before I go single and see how she's running. Also saw Ryan G. while I was up there and said hi, seems like a nice guy Anyway, pics and dyno plots. http://www.i-macca.co.uk/temp/dyno290907-1.jpg http://www.i-macca.co.uk/temp/dyno290907-2.jpg http://www.i-macca.co.uk/temp/dyno290907-3.jpg http://www.i-macca.co.uk/temp/dyno290907-4.jpg http://www.i-macca.co.uk/temp/dyno290907-5.jpg To say I was pleased was an understatement, really didn't expect those figures, especially at SRR, and when about 8 of the 10 people there got lower figures than expected. Charlie said the car was running really nice, just rich as you would expect from a Supra. All this on a UK car with just decats and an exhaust @ 1.05bar Link to comment Share on other sites More sharing options...
Muffleman Posted September 29, 2007 Share Posted September 29, 2007 Nice And yes, Ryan is a jolly nice chap Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted September 29, 2007 Share Posted September 29, 2007 Nice one Mark:) i said yours was quicker than mine, and those AFRs arnt that rich, are you sure you have std turbos:p Link to comment Share on other sites More sharing options...
ADL Mark Posted September 29, 2007 Author Share Posted September 29, 2007 Lol.. I've no reason to believe otherwise! Full Toyota service before I had her.. I've certainly not taken them off Still, the thing is so lardy all the little four-pot turbo's were giving me a run for my money on the way home. Most of them weigh about 2/3rds what my car does though, and their turbo's get going much quicker Link to comment Share on other sites More sharing options...
Jamesy Posted September 29, 2007 Share Posted September 29, 2007 wow! 396 bhp from just decatting it - top job mate!! if you have decatted it, did you also have to get a new fuel pump, fcd and spark plugs, or did you just decat it and go?! Link to comment Share on other sites More sharing options...
ADL Mark Posted September 29, 2007 Author Share Posted September 29, 2007 I stuck some Iridium's in at the same time, as it needed new plugs anyway. It has an FCD, but I've never got round to plumbing in the boost controller and making use of it.. Link to comment Share on other sites More sharing options...
Jamesy Posted September 29, 2007 Share Posted September 29, 2007 top job fella - u must be chuffed!! did u get an uprated fuel pump and intercooler too? Link to comment Share on other sites More sharing options...
SupraD06 Posted September 29, 2007 Share Posted September 29, 2007 RESULT, but how can so much power be had from just that, ive had my tt dynod and its only making 412bhp at 18psi n thats with FCD, FMIC, booste controller, uprated water n fuel pumps, fuel neo, full de-cat and induction kit, im not as happy as i was now after reading that, Link to comment Share on other sites More sharing options...
ADL Mark Posted September 30, 2007 Author Share Posted September 30, 2007 Standard SMIC, replaced the original because it was missing the first 1" of fins, got one from eBay for about £40. Original fuel pump etc. Link to comment Share on other sites More sharing options...
ADL Mark Posted September 30, 2007 Author Share Posted September 30, 2007 Oh, it's also got a K&N panel filter, but I don't think that makes much difference to be honest.. Link to comment Share on other sites More sharing options...
dr_blackman Posted September 30, 2007 Share Posted September 30, 2007 Nice result mate Link to comment Share on other sites More sharing options...
Jamesy Posted September 30, 2007 Share Posted September 30, 2007 thats amazing performance fella. i'm getting mine decatted in the next few weeks, but also having to splash out on spark plugs, fcd, and fuel pump.... still...if im around 400bhp i'll be well pleased!! Link to comment Share on other sites More sharing options...
bignum Posted September 30, 2007 Share Posted September 30, 2007 Push the boost to 1.2 and then smile some more:) Link to comment Share on other sites More sharing options...
ADL Mark Posted September 30, 2007 Author Share Posted September 30, 2007 I'm not going to fiddle around with plumbing in a boost controller, there's a single kit on the way so we shall see what that brings Link to comment Share on other sites More sharing options...
Homer Posted September 30, 2007 Share Posted September 30, 2007 I'm not going to fiddle around with plumbing in a boost controller, there's a single kit on the way so we shall see what that brings Edited - Should know better - answered my own question last week! PS: good luck Link to comment Share on other sites More sharing options...
ADL Mark Posted September 30, 2007 Author Share Posted September 30, 2007 Lol Homer, saw the e-mail with your original reply and was just about to say you should know as you had a lot of input in it Link to comment Share on other sites More sharing options...
Jamesy Posted September 30, 2007 Share Posted September 30, 2007 replaced the original because it was missing the first 1" of fins, got one from eBay for about £40. where from matey? Link to comment Share on other sites More sharing options...
ADL Mark Posted September 30, 2007 Author Share Posted September 30, 2007 got one from eBay Did that not give it away? If you're after a new standard SMIC then mine will be available by the weekend.. Link to comment Share on other sites More sharing options...
Jamesy Posted October 1, 2007 Share Posted October 1, 2007 Did that not give it away? If you're after a new standard SMIC then mine will be available by the weekend.. lol - i meant as in what trader on ebay!! anyway...you got PM dude! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now