jazz1 Posted August 18, 2007 Share Posted August 18, 2007 wher can i buy this machine? Link to comment Share on other sites More sharing options...
j80leo Posted August 18, 2007 Share Posted August 18, 2007 machine mart Link to comment Share on other sites More sharing options...
jazz1 Posted August 19, 2007 Author Share Posted August 19, 2007 any idea where i can get a polishing machine that will get into corners for more detail work? Link to comment Share on other sites More sharing options...
Paul Posted August 19, 2007 Share Posted August 19, 2007 Use a Dremmel with a small polishing mop on it? Link to comment Share on other sites More sharing options...
jazz1 Posted August 19, 2007 Author Share Posted August 19, 2007 Use a Dremmel with a small polishing mop on it? where can i get that from? iv tryed searching the web? my dad has the big machine which works wicked for pipes but that cant get into corners of detail work Link to comment Share on other sites More sharing options...
Paul Posted August 19, 2007 Share Posted August 19, 2007 Homebase? Most DIY places sell these. BTW, the ali knobs are nearly ready. Take a look on the thread for payment details;) Link to comment Share on other sites More sharing options...
JamieP Posted August 19, 2007 Share Posted August 19, 2007 Ebay will have them. Link to comment Share on other sites More sharing options...
j80leo Posted August 19, 2007 Share Posted August 19, 2007 send it to colin;) Link to comment Share on other sites More sharing options...
jazz1 Posted August 19, 2007 Author Share Posted August 19, 2007 send it to colin;) hes too buisy Link to comment Share on other sites More sharing options...
j80leo Posted August 19, 2007 Share Posted August 19, 2007 hes too buisy i would wait until he could do them jazz hard work doin it yourself and dirty;) Link to comment Share on other sites More sharing options...
Elmo Posted August 19, 2007 Share Posted August 19, 2007 http://www.dremel-direct.com/ Link to comment Share on other sites More sharing options...
jazz1 Posted August 19, 2007 Author Share Posted August 19, 2007 i would wait until he could do them jazz hard work doin it yourself and dirty;) not really took me less than 4 mins to polish half of my greddy pipes Link to comment Share on other sites More sharing options...
jazz1 Posted August 19, 2007 Author Share Posted August 19, 2007 found this http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160148007127&ih=006&category=633&_trksid=p3286.m7&_trkparms=Algo%3DLVI%26ITS%3D%26ITU%3D%26OTN%3D3%26PO%3DOp1 Link to comment Share on other sites More sharing options...
DamanC Posted August 19, 2007 Share Posted August 19, 2007 Thats just a detail kit Jazz, of they are dull as buggery then you will need a full kit. I got mine from polishing kits uk on ebay. Done my IC pipework yesterday and tbh its a pritty good job Link to comment Share on other sites More sharing options...
jazz1 Posted August 19, 2007 Author Share Posted August 19, 2007 i just contacted him going to order tommorow from him so i can poilsh all my engine scews Link to comment Share on other sites More sharing options...
jazz1 Posted August 20, 2007 Author Share Posted August 20, 2007 http://cgi.ebay.co.uk/26-pc-Combined-Abrasive-Polishing-Kit-Belgom-Alu_W0QQitemZ180149921172QQihZ008QQcategoryZ25644QQssPageNameZWDVWQQrdZ1QQcmdZViewItem ordered this to do all the small bits in my engine:) Link to comment Share on other sites More sharing options...
movistar Posted August 20, 2007 Share Posted August 20, 2007 I have a small bobin set i use in my motorbike...demon tweeks or hein gerrick should have what your looking for! Link to comment Share on other sites More sharing options...
jazz1 Posted August 20, 2007 Author Share Posted August 20, 2007 I have a small bobin set i use in my motorbike...demon tweeks or hein gerrick should have what your looking for! already ordered that above kit i want to polish all those screws etc in my engine bay Link to comment Share on other sites More sharing options...
Guest Chumpalot Posted August 20, 2007 Share Posted August 20, 2007 Get a variable speed Dremel as Elmo said. Superb bits of kit and can be used for loads of other things as well. Apart from hammering nails into things Link to comment Share on other sites More sharing options...
DamanC Posted August 20, 2007 Share Posted August 20, 2007 http://cgi.ebay.co.uk/26-pc-Combined-Abrasive-Polishing-Kit-Belgom-Alu_W0QQitemZ180149921172QQihZ008QQcategoryZ25644QQssPageNameZWDVWQQrdZ1QQcmdZViewItem ordered this to do all the small bits in my engine:) Same kit as moi Link to comment Share on other sites More sharing options...
jazz1 Posted August 20, 2007 Author Share Posted August 20, 2007 Same kit as moi cant wait to polish up Link to comment Share on other sites More sharing options...
DamanC Posted August 20, 2007 Share Posted August 20, 2007 Good luck, and take your time. Link to comment Share on other sites More sharing options...
Sharpie Posted August 21, 2007 Share Posted August 21, 2007 some bits here http://www.frost.co.uk/productList.asp?catID=27&frostCat=Polishing Link to comment Share on other sites More sharing options...
edge Posted August 22, 2007 Share Posted August 22, 2007 cant wait to polish up Dont forget before, lots in between and after pics. Is this your first attempt? Would love to give it ago. Link to comment Share on other sites More sharing options...
jazz1 Posted August 22, 2007 Author Share Posted August 22, 2007 Dont forget before, lots in between and after pics. Is this your first attempt? Would love to give it ago. well first attempt but my dad has a big machine at the garage and my brother told me about it so i decided to see if that would polish my turbo pipes, tryed it for 5 minutes and that really worked came out mirror finish Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now