mplavery Posted July 16, 2007 Share Posted July 16, 2007 Hi ppl, Just thought i would post a update on my car. I have just installed my Defi Guages and HKS Boost Controler, Also done my headlight lenses which i got from Suprattgaz. Then took my car to Whifbitz and they done the timing belt, fcd, and done the last bits to the boost controller, piping it to the engine as i done the rest. ooo and i added some badges as well. Its now full BPU and feels soooo good The head lenes look good but when ur up close its not that tidy but its the best i can do....lol so ppl what do you think? Link to comment Share on other sites More sharing options...
Homer Posted July 16, 2007 Share Posted July 16, 2007 VERY tidy looking car there, so good to see a decent finish on the paintwork and interior panels IMO (and thats all it is), I'd ditch the TuRD sticker from the front window, it kind of spoils the smooth lines of the car and makes an otherwise lovely car look a little chav. Also, unless you're 5 foot tall, won't that disrupt your vission? I'm 6 foot and with the seat on the lowest setting still find the top of the sunscreen line too low! Oh and the window deflectors (or whatever they're called), the only excuse for those is if you smoke Link to comment Share on other sites More sharing options...
mplavery Posted July 16, 2007 Author Share Posted July 16, 2007 VERY tidy looking car there, so good to see a decent finish on the paintwork and interior panels IMO (and thats all it is), I'd ditch the TuRD sticker from the front window, it kind of spoils the smooth lines of the car and makes an otherwise lovely car look a little chav. Oh and the window deflectors (or whatever they're called), the only excuse for those is if you smoke lol thanks homer, i did not evern wax it...i c what you mean about the window sticker at the front...and i have cracked the wind deflectors by leaning on it when getting out the car..poxy things...what do you think about there rear badges...i wanted something different but i dunno if its over the top ? Link to comment Share on other sites More sharing options...
Homer Posted July 16, 2007 Share Posted July 16, 2007 lol thanks homer, i did not evern wax it...i c what you mean about the window sticker at the front...and i have cracked the wind deflectors by leaning on it when getting out the car..poxy things...what do you think about there rear badges...i wanted something different but i dunno if its over the top ? I'm one of those folks that debadged completely so probably not the best to ask I like the 'clean' look, so the less the better IMO. It still looks very nice thought, so whatever you do from here (provided it's not adding tack) should be a good move Link to comment Share on other sites More sharing options...
mplavery Posted July 16, 2007 Author Share Posted July 16, 2007 oh i was ment to say the first pic ...one with the new lense and one without...big change eh Link to comment Share on other sites More sharing options...
wrenlea Posted July 16, 2007 Share Posted July 16, 2007 Really Smart! I love the night view My Supra is at Whifbitz right now:) Link to comment Share on other sites More sharing options...
mplavery Posted July 16, 2007 Author Share Posted July 16, 2007 I'm one of those folks that debadged completely so probably not the best to ask I like the 'clean' look, so the less the better IMO. It still looks very nice thought, so whatever you do from here (provided it's not adding tack) should be a good move funny you said as i like the debadge look, so i took the toyota badge of the saw 3 holes..so i stuck that badge on till i can afford to smothit over..was going to leave the trd sticker on the left of the boot though Link to comment Share on other sites More sharing options...
Homer Posted July 16, 2007 Share Posted July 16, 2007 Fair enough mate One thing I notice is the postion of the number plate - it's not good as you're blocking 50% of the airflow to the rad At the moment I just stick a normal size plate in the window, but will be working on a way to fit one to a do luck. I think it's best to get a normal size UK plate (or very slighlty undersize if you have reg that can get away with it) and fit it at a slight inward angle under the 'nose'. Will start up a new thread when I have it made! Link to comment Share on other sites More sharing options...
mplavery Posted July 16, 2007 Author Share Posted July 16, 2007 Fair enough mate One think I notice is the postion of the number plate - it's not good as you're blocking 50% of the airflow to the rad At the moment I just stick a normal size plate in the window, but will be working on a way to fit one to a do luck. I think it's best to get a normal size UK plate (or very slighlty undersize if you have reg that can get away with it) and fit it at a slight inward angle under the 'nose'. Will start up a new thread when I have it made! i agree... just dont like the uk plate stuck onor anywhere...i want to do like a smaller size one then the uk though..i know it wont be road legal..but what the hell..lol Link to comment Share on other sites More sharing options...
mplavery Posted July 16, 2007 Author Share Posted July 16, 2007 oh saw these cars at whifbitz..orange one is awsome...my otherhalf's car is the blue mr2 which had a fcd and oil change Link to comment Share on other sites More sharing options...
Homer Posted July 16, 2007 Share Posted July 16, 2007 i agree... just dont like the uk plate stuck onor anywhere...i want to do like a smaller size one then the uk though..i know it wont be road legal..but what the hell..lol You can make them smaller than the "stock UK" and still be within limits specified by DVLA, details are on the site somewhere, but it helps if you have a personal reg. Link to comment Share on other sites More sharing options...
jazz1 Posted July 16, 2007 Share Posted July 16, 2007 very alpine looking ace with the new headlights bet that car turns heads:d Link to comment Share on other sites More sharing options...
mplavery Posted July 16, 2007 Author Share Posted July 16, 2007 very alpine looking ace with the new headlights bet that car turns heads:d I am really pleased with the headloghts..makes a big change..more up to date Link to comment Share on other sites More sharing options...
jazz1 Posted July 16, 2007 Share Posted July 16, 2007 where did you get these two things from please tell me? Link to comment Share on other sites More sharing options...
mplavery Posted July 16, 2007 Author Share Posted July 16, 2007 where did you get these two things from please tell me? i got the knobs from a group buy which was on here a few mths back...have seen them on ebay as well...about £25...the backing you can get from metalmonkey, they also do a sticker for the clock as well http://metal-monkey.co.uk/ Link to comment Share on other sites More sharing options...
hogmaw Posted July 16, 2007 Share Posted July 16, 2007 Dash looks v. nice, good job Link to comment Share on other sites More sharing options...
mplavery Posted July 16, 2007 Author Share Posted July 16, 2007 Dash looks v. nice, good job cheers mate, veryplease with it Link to comment Share on other sites More sharing options...
jazz1 Posted July 16, 2007 Share Posted July 16, 2007 cheers dude:d just placed an order Link to comment Share on other sites More sharing options...
Homer Posted July 16, 2007 Share Posted July 16, 2007 This might be a bit of a big ask but is there any chance you can check the beam pattern with those light covers installed? All common sense says they'll spread dipped beam all over the place, but I really want to be proved otherwise They look great. Link to comment Share on other sites More sharing options...
mplavery Posted July 16, 2007 Author Share Posted July 16, 2007 This might be a bit of a big ask but is there any chance you can check the beam pattern with those light covers installed? All common sense says they'll spread dipped beam all over the place, but I really want to be proved otherwise They look great. When Suprattgaz made them he did check the beam pattern and he said it was correct, i think he even had a MOT which passed with them on..dnt qoute me on that though...there is a thread on them if you do a quick surch mate **** just checked and they did pass a mot****** Link to comment Share on other sites More sharing options...
Homer Posted July 17, 2007 Share Posted July 17, 2007 When Suprattgaz made them he did check the beam pattern and he said it was correct, i think he even had a MOT which passed with them on..dnt qoute me on that though...there is a thread on them if you do a quick surch mate **** just checked and they did pass a mot****** Thanks mate. I'm a bit cynical on the results, all tech info says they should fail, but might wait till one of you guys has to pass one Link to comment Share on other sites More sharing options...
mplavery Posted July 17, 2007 Author Share Posted July 17, 2007 Thanks mate. I'm a bit cynical on the results, all tech info says they should fail, but might wait till one of you guys has to pass one lol i understand mate...no worries for me as i know loads of ppl in the motor ind Link to comment Share on other sites More sharing options...
gaz1 Posted July 17, 2007 Share Posted July 17, 2007 looks great mate, bet your well happy;) Link to comment Share on other sites More sharing options...
mplavery Posted July 17, 2007 Author Share Posted July 17, 2007 looks great mate, bet your well happy;) i am Gaz..really pleased mate cant wait fro JAE Link to comment Share on other sites More sharing options...
gaz1 Posted July 17, 2007 Share Posted July 17, 2007 i am Gaz..really pleased mate cant wait fro JAE ggod man when you going up:D Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now