LeeT Posted April 19, 2006 Share Posted April 19, 2006 Finished my 6spd onversion and what a difference. i was bored with 3 years with the auto so fancied a change. only took around 20 relaxed hours from start to finish and that included me getting p*ssed and chatting to mates etc whilst i was doing it. Apologies to JohnK, the bits turned up and i just went for it and didnt really give anything else a thought. sorry mate:rolleyes: just need to do a bit of road tuning to get her ready for the france trip now:D Link to comment Share on other sites More sharing options...
supragold Posted April 19, 2006 Share Posted April 19, 2006 Do you prefer the manual now then? Link to comment Share on other sites More sharing options...
JamieP Posted April 19, 2006 Share Posted April 19, 2006 well done mate:clap: Link to comment Share on other sites More sharing options...
colsoop Posted April 19, 2006 Share Posted April 19, 2006 Nice one , any pictures ? Link to comment Share on other sites More sharing options...
GeordieSteve Posted April 19, 2006 Share Posted April 19, 2006 OOOOO Was it an expensive modification? Something I fancy doing but I've always thought it was MEGA bucks Link to comment Share on other sites More sharing options...
LeeT Posted April 19, 2006 Author Share Posted April 19, 2006 Nice one , any pictures ? erm no. i was too stuck into the job to take pics during the install. Not to mention a bit tipsy by the end of each day:D Link to comment Share on other sites More sharing options...
LeeT Posted April 19, 2006 Author Share Posted April 19, 2006 Do you prefer the manual now then? i was always a manual man before but got a good deal on this one with a px against my 300zx. although i highly rate the auto, yes i prefer the manual. just about got the hang of the HKS twin plate:D Link to comment Share on other sites More sharing options...
terribleturner Posted April 19, 2006 Share Posted April 19, 2006 Good job Link to comment Share on other sites More sharing options...
lockys96 Posted April 19, 2006 Share Posted April 19, 2006 well done lad, now you know what you have been missing Link to comment Share on other sites More sharing options...
Pete Posted April 19, 2006 Share Posted April 19, 2006 Congratulations and well done! Link to comment Share on other sites More sharing options...
LeeT Posted April 19, 2006 Author Share Posted April 19, 2006 OOOOO Was it an expensive modification? Something I fancy doing but I've always thought it was MEGA bucks cost me less than a grand:D whilst im on the subject, i must say a big thanks to DarrenjAdams for sorting me out a UK 6spd ECU and throwing me in a free pilot bearing and advice, lucifer for supplying me with a free dash panel, and Tlicense for a few tips on the wiring side of things Link to comment Share on other sites More sharing options...
DannoSupra Posted April 19, 2006 Share Posted April 19, 2006 i think i'll be looking into Manual Conversion soon!! any hard times doing the job/ or fiddly things? Link to comment Share on other sites More sharing options...
LeeT Posted April 19, 2006 Author Share Posted April 19, 2006 i think i'll be looking into Manual Conversion soon!! any hard times doing the job/ or fiddly things? it was all really straight forward and i had no issues with anything. the only part i didnt care for much was cutting the sub tunnel as i ended up getting my angle grinder in there to finish the cutting as it was a bit tight in there. a bit brutal but it worked out perfectly Link to comment Share on other sites More sharing options...
Pig Posted April 19, 2006 Share Posted April 19, 2006 Good job, think im going this way soon! Ouch again lol! Link to comment Share on other sites More sharing options...
Mas Posted April 19, 2006 Share Posted April 19, 2006 nice one mate, welcome to the manual world of Supras Link to comment Share on other sites More sharing options...
DannoSupra Posted April 19, 2006 Share Posted April 19, 2006 it was all really straight forward and i had no issues with anything. the only part i didnt care for much was cutting the sub tunnel as i ended up getting my angle grinder in there to finish the cutting as it was a bit tight in there. a bit brutal but it worked out perfectly Nice one! i'll start Spending on bits one by one Link to comment Share on other sites More sharing options...
colsoop Posted April 19, 2006 Share Posted April 19, 2006 How are you finding the gearbox ? Link to comment Share on other sites More sharing options...
terribleturner Posted April 19, 2006 Share Posted April 19, 2006 A grand?? Is the stock gearbox componets or uprated items?? Link to comment Share on other sites More sharing options...
LeeT Posted April 19, 2006 Author Share Posted April 19, 2006 How are you finding the gearbox ? gearbox is great. i changed all the oils etc when fitting everything. i do have a slight difficulty going into reverse but when i fitted the box i noticed a completely split bush on the selector assembly and i wouldnt be surprised if this was down to that Link to comment Share on other sites More sharing options...
LeeT Posted April 19, 2006 Author Share Posted April 19, 2006 A grand?? Is the stock gearbox componets or uprated items?? stock box, HKS twin plate clutch with lightened flywheel, diff, prop and drive shafts. i sourced things like gearknob, dash panel etc individually. its surprising how much you can save if you're not in a rush:) Link to comment Share on other sites More sharing options...
GeordieSteve Posted April 19, 2006 Share Posted April 19, 2006 You sir... are inspiring! Manual conversion is on my list now! Link to comment Share on other sites More sharing options...
Bobbeh Posted April 19, 2006 Share Posted April 19, 2006 Nice work Lee Link to comment Share on other sites More sharing options...
LeeT Posted April 19, 2006 Author Share Posted April 19, 2006 You sir... are inspiring! Manual conversion is on my list now! have you fitted that turbo yet? still going to France? Link to comment Share on other sites More sharing options...
Kopite Posted April 19, 2006 Share Posted April 19, 2006 Well done Lee, you're one of us now Link to comment Share on other sites More sharing options...
GeordieSteve Posted April 19, 2006 Share Posted April 19, 2006 have you fitted that turbo yet? still going to France? Turbo has just left Memphis so I doubt I'll make it Was gonna take the bike instead but it'd be bloody agony Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now