whitesupratt Posted March 29, 2006 Share Posted March 29, 2006 so when I get this fricking decat done on my J spec TT, I definatly need a FCD? and it can handle 1.2 bar on stock tubbies? Link to comment Share on other sites More sharing options...
Ian C Posted March 29, 2006 Share Posted March 29, 2006 Yes Link to comment Share on other sites More sharing options...
Lewis Posted March 29, 2006 Share Posted March 29, 2006 or no Link to comment Share on other sites More sharing options...
Pete Posted March 29, 2006 Share Posted March 29, 2006 or yes Link to comment Share on other sites More sharing options...
Class One Posted March 29, 2006 Share Posted March 29, 2006 Yes and for how long is anyones guess!!! Link to comment Share on other sites More sharing options...
Kopite Posted March 29, 2006 Share Posted March 29, 2006 Possibly.... Link to comment Share on other sites More sharing options...
chilli Posted March 29, 2006 Share Posted March 29, 2006 probably, or probably not, it depends... Link to comment Share on other sites More sharing options...
mr lover Posted March 29, 2006 Share Posted March 29, 2006 should be ok ..... but ...no it will be alright ... i'm sure Link to comment Share on other sites More sharing options...
markrzs Posted March 29, 2006 Share Posted March 29, 2006 Unless........ Link to comment Share on other sites More sharing options...
Ian R Posted March 29, 2006 Share Posted March 29, 2006 hit miss or maybe ?? Link to comment Share on other sites More sharing options...
ardasaliah Posted March 29, 2006 Share Posted March 29, 2006 50% 50% so maybe Link to comment Share on other sites More sharing options...
markssupra Posted March 29, 2006 Share Posted March 29, 2006 absolutely positively not sure Link to comment Share on other sites More sharing options...
whitesupratt Posted March 29, 2006 Author Share Posted March 29, 2006 I should have known! Link to comment Share on other sites More sharing options...
Robert Posted March 29, 2006 Share Posted March 29, 2006 lol yes you will mate, you will hit the fuel cut a about 14psi and 1.2 bar is 18psi if im correct Link to comment Share on other sites More sharing options...
Dash Rendar Posted March 29, 2006 Share Posted March 29, 2006 Stock tubbies will handle 1.2 bar, but potentially not for very long. That said, some here have run stock tubbies at 1.2 bar for quite a long time. If they pop in a year's time, you'll have a perfect excuse to go hybrids! Link to comment Share on other sites More sharing options...
Guest Flat4_ire Posted March 29, 2006 Share Posted March 29, 2006 so when I get this fricking decat done on my J spec TT, I definatly need a FCD? and it can handle 1.2 bar on stock tubbies? colder plugs and an uprated fuel pump too man, and stick her at a bit under 1.2bar Link to comment Share on other sites More sharing options...
whitesupratt Posted March 29, 2006 Author Share Posted March 29, 2006 iv got the pump and plug ready to go in, but was going to get a restrictor ring at 1.2 bar and an FCD Link to comment Share on other sites More sharing options...
Guest Flat4_ire Posted March 29, 2006 Share Posted March 29, 2006 iv got the pump and plug ready to go in, but was going to get a restrictor ring at 1.2 bar and an FCD get 1 bar rring, if u get 1.2bar rring then u cant go below that man! Link to comment Share on other sites More sharing options...
whitesupratt Posted March 29, 2006 Author Share Posted March 29, 2006 but can go above if i get a controller still? still need an fcd? Link to comment Share on other sites More sharing options...
Robert Posted March 29, 2006 Share Posted March 29, 2006 yes you will need FCD if you decat full stop. Link to comment Share on other sites More sharing options...
whitesupratt Posted March 29, 2006 Author Share Posted March 29, 2006 ohhh bugger more money! right, well i need to find the cheapest suppliers! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now