Sandesupra Posted February 23, 2017 Share Posted February 23, 2017 Hi guys Looking at going single with a PT 6266 with a log cast manifold. cant really decide on the a/r... Whats the major difference and restrictions on the .68 vs .81? T4 open (undivided) Any advice would be appriciated (spelling is probably shit;-) looking for 500whp quick spooling, tyre burning fun:-) Phil Link to comment Share on other sites More sharing options...
mellonman Posted February 23, 2017 Share Posted February 23, 2017 Well the .68 will see you spool quicker and would be more suited to a 500 bhp goal, the 81. Will make more power and have little drop off of torque in the higher rpm. If your auto I would go with .68 if manual I would go with .81. The down side to the .68 it is restrictive in the higher rev range which does see a drop off in torque but if your auto thats not such a bad thing as your box will last alot longer Link to comment Share on other sites More sharing options...
Sandesupra Posted February 23, 2017 Author Share Posted February 23, 2017 Cheers mate!:-) Was thinking along that line, but really dont have a clue;-) it's a manual, so 81 it is:-) Thanks for a really understanding anwser:-) Phil Link to comment Share on other sites More sharing options...
Guest Budz86 Posted February 23, 2017 Share Posted February 23, 2017 Lower A/R = less power but faster spool. Bigger A/R = more power but later spool. Link to comment Share on other sites More sharing options...
Glanza_Mike Posted February 23, 2017 Share Posted February 23, 2017 Hi Phil, I just bought a 6266 and a cast manifold kit with the .81 and I'm happy with it. I'm auto too. Link to comment Share on other sites More sharing options...
Sheefa Posted February 23, 2017 Share Posted February 23, 2017 Go bigger mate like Mike at .81 the 6266 is so damn quick spooling anyway I think going smaller would be nonsensical. Link to comment Share on other sites More sharing options...
mellonman Posted February 23, 2017 Share Posted February 23, 2017 Hi Phil, I just bought a 6266 and a cast manifold kit with the .81 and I'm happy with it. I'm auto too. Out of intrest do you know what power you made and at what boost mate. Cheers Link to comment Share on other sites More sharing options...
Sandesupra Posted February 23, 2017 Author Share Posted February 23, 2017 Hi Phil, I just bought a 6266 and a cast manifold kit with the .81 and I'm happy with it. I'm auto too. Same as im going for then:-) 46mm wastgate? 1bar spring? What numbers are you seeing:-) Just have to get my hybrids of and sell before ordering:-) Stoked ATM, cant wait for summer and single:-) Link to comment Share on other sites More sharing options...
Sandesupra Posted February 23, 2017 Author Share Posted February 23, 2017 Go bigger mate like Mike at .81 the 6266 is so damn quick spooling anyway I think going smaller would be nonsensical. Yes, thats the plan now:-) Single here i come!:-) Link to comment Share on other sites More sharing options...
berg Posted February 23, 2017 Share Posted February 23, 2017 I have the 1.00A/R on a log manifold Much better for top end and still spools like a mofo Link to comment Share on other sites More sharing options...
Glanza_Mike Posted February 23, 2017 Share Posted February 23, 2017 46mm wastegate yeah I think. 12psi spring but I'm seeing 1bar. Not had it mapped yet so can't confirm numbers. Link to comment Share on other sites More sharing options...
Sandesupra Posted February 23, 2017 Author Share Posted February 23, 2017 46mm wastegate yeah I think. 12psi spring but I'm seeing 1bar. Not had it mapped yet so can't confirm numbers. i've read about it spikes 1-3psi because of the wastgate positioning, but as long as its just a small spike.. it will not bother me that much;-) Link to comment Share on other sites More sharing options...
mellonman Posted February 23, 2017 Share Posted February 23, 2017 46mm wastegate yeah I think. 12psi spring but I'm seeing 1bar. Not had it mapped yet so can't confirm numbers. You must have some sort of map on it to be runing 1 bar surely . Having a un mapped single well a base mapped single is nothing compaired to a mapped one it will blow your socks off lol. Link to comment Share on other sites More sharing options...
berg Posted February 23, 2017 Share Posted February 23, 2017 Having a un mapped single well a base mapped single is nothing compaired to a mapped one it will blow your socks off lol. This is very true, i found this out Link to comment Share on other sites More sharing options...
Big Mark Posted February 24, 2017 Share Posted February 24, 2017 I have the 1.00A/R on a log manifold Much better for top end and still spools like a mofo Dam, forgot you went for a 1.00 A/R. I wonder what the power output of 1.00 compared to 0.81 A/R is? Link to comment Share on other sites More sharing options...
Glanza_Mike Posted February 24, 2017 Share Posted February 24, 2017 You must have some sort of map on it to be runing 1 bar surely . Having a un mapped single well a base mapped single is nothing compaired to a mapped one it will blow your socks off lol. Yeah so I've heard haven't got a base map no, just stock ecu. My wideband is saying afr is fine on full boost though. It's actually a bit rich so definitely safe for the time being. Dam, forgot you went for a 1.00 A/R. I wonder what the power output of 1.00 compared to 0.81 A/R is? We'll find out when I have mine mapped! Although it won't be a true like for like as I have vvti but close enough. Link to comment Share on other sites More sharing options...
Big Mark Posted February 24, 2017 Share Posted February 24, 2017 What turbo kit did you go for Mike and what else have you done to your car over winter? Berg and I have exactly the same turbo kit, inlet and both have 264 cams but he's 1.00 and I'm 0.81. But I'm a few months still at least and I've had a full engine rebuild and head work so again not totally like for like but as close as. Link to comment Share on other sites More sharing options...
Glanza_Mike Posted February 24, 2017 Share Posted February 24, 2017 Don't want to derail this chaps thread too much but I've done a lot mate Or what feels like a lot, i'll update my thread soon. Link to comment Share on other sites More sharing options...
Sandesupra Posted February 24, 2017 Author Share Posted February 24, 2017 Don't want to derail this chaps thread too much but I've done a lot mate Or what feels like a lot, i'll update my thread soon. derail as much as you like!.-) more info on the turbo the better:-) got my anwser on de A/R so all good:-) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now