a98pmalcolm Posted December 17, 2016 Share Posted December 17, 2016 Hey all. I have a creaking boot. Ive replaced the rubbers and its new shocks. I read on a thread of which i cant find now that the boot catch needs a adjusting when new rubbers go on. I had a look at my catch tonight and there is no adjustment at all. Just bolts directly onto the body. Can any one shed some light? Thanks Link to comment Share on other sites More sharing options...
Ric Posted December 18, 2016 Share Posted December 18, 2016 (edited) I've also thought my boot hatch needed some adjustment, i think it looks like it's open when it's closed. I think most of the adjustment is done on the latch which is attached to the car body (not the boot lid) however, the screws are countersunk so it just relocates to where it wants anyway. The manual does show adjustment though, so i didn't get it either. It seems like you need to swap to a none-centring bolt also. Edited December 18, 2016 by Ric (see edit history) Link to comment Share on other sites More sharing options...
rider Posted December 18, 2016 Share Posted December 18, 2016 If you replaced all the rubbers on the hatch then as Ric says start with the lock adjustment. I'm surprised that replacing the hatch rubbers didn't sort the creaking out though, did you replace both the side and lip rubbers? Link to comment Share on other sites More sharing options...
mwilkinson Posted December 18, 2016 Share Posted December 18, 2016 Good info. I had the same issue on mine, but when I went to adjust the boot lid latch I couldn't, due to the self centering nuts. My thought was that there must be an underlying cause, likely wear on the latch and mechanism itself. However on inspection the latch itself looked in very good order. Link to comment Share on other sites More sharing options...
a98pmalcolm Posted December 18, 2016 Author Share Posted December 18, 2016 thanks for the replies guys. In regards to pic 3 of the info list "adjust door lock" Thatst he one I tried 1st but there was no movement able to be made as its a direct bolt onto the body. Yes I replaced the 2 lower rubbers and both upper plastics Link to comment Share on other sites More sharing options...
Ric Posted December 19, 2016 Share Posted December 19, 2016 no movement able to be made as its a direct bolt onto the body. Thats because you have to change the nuts to none centring from the manual excerpt above. Otherwise the lock will also just self-relocate. Link to comment Share on other sites More sharing options...
a98pmalcolm Posted December 19, 2016 Author Share Posted December 19, 2016 Thats because you have to change the nuts to none centring from the manual excerpt above. Otherwise the lock will also just self-relocate. Ahh Ok brilliant thanks bud, now I understand. I will have to find out what size they are Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now