Kendo11 Posted January 4, 2015 Share Posted January 4, 2015 Just changing my rear brake discs and calipers and adjusted the handbrake notch thing behind the hub face. I'm refitting everything now and I read somewhere you need to adjust the notch thing all the way back in, then back down around 6-8 times. However it just keeps going, doesn't seem to be hitting a tight point. Do I need to do this with the handbrake on? Am I spinning it wrong? (up and away from me)? Any help would be appreciated! Link to comment Share on other sites More sharing options...
Mk4Gaz Posted January 4, 2015 Share Posted January 4, 2015 With the handbrake off, spin in until the brake shoes grip the disc, so it's difficult to turn. Then back it off a couple of turns, so the disc spins freely again. That's it Link to comment Share on other sites More sharing options...
Kendo11 Posted January 4, 2015 Author Share Posted January 4, 2015 I think I may have loosened it too much, as it's not moving back into the spring Link to comment Share on other sites More sharing options...
Kendo11 Posted January 4, 2015 Author Share Posted January 4, 2015 This is the spring position at the moment Link to comment Share on other sites More sharing options...
Kendo11 Posted January 4, 2015 Author Share Posted January 4, 2015 Anybody have any ideas? Really struggling Link to comment Share on other sites More sharing options...
Mk4Gaz Posted January 4, 2015 Share Posted January 4, 2015 Can you not use a small pry against the shoe, to push it back towards the adjuster, then once you got a couple of spins on the adjusting star, it should start to bite the thread again Link to comment Share on other sites More sharing options...
Kendo11 Posted January 4, 2015 Author Share Posted January 4, 2015 Just been trying that with every bloody tool I've got haha. Will keep trying Link to comment Share on other sites More sharing options...
Benjy Posted January 4, 2015 Share Posted January 4, 2015 Looks like there's a piece missing. Link to comment Share on other sites More sharing options...
Kendo11 Posted January 4, 2015 Author Share Posted January 4, 2015 I'm not sure of that's just because it's wound so far back in Link to comment Share on other sites More sharing options...
Benjy Posted January 4, 2015 Share Posted January 4, 2015 It's not wound in, that's wound all the way out! Link to comment Share on other sites More sharing options...
Kendo11 Posted January 4, 2015 Author Share Posted January 4, 2015 Yeah that lol Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 5, 2015 Share Posted January 5, 2015 You realise it's a LH thread? Link to comment Share on other sites More sharing options...
Kendo11 Posted January 5, 2015 Author Share Posted January 5, 2015 Yeah it's too far out mate, wound it out way too much. Will sort it next weekend. Link to comment Share on other sites More sharing options...
Kendo11 Posted January 10, 2015 Author Share Posted January 10, 2015 Little update, got this just about done today. The little spring/washer set up on either shoe was bloody fiddly to say the least. Very straightforward job though. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now