ripped_fear Posted July 29, 2014 Share Posted July 29, 2014 Hi all About to have my new Rocker covers and my NA plenum, Y-pipe, and throttle body fitted. I bought new gaskets for it all from Toyota at the weekend my question is do you need to put any sort of sealant on the gaskets for either the intake or the rocker gaskets? Or do you simply put them in place and tighten up. Thanks Jake Link to comment Share on other sites More sharing options...
Stevo Posted July 29, 2014 Share Posted July 29, 2014 No sealant needed for either mate. Just tighten them up to the recommended torque settings - from what I remember, the rocker covers are canny low, something like 5nm! Link to comment Share on other sites More sharing options...
Dnk Posted July 29, 2014 Share Posted July 29, 2014 (edited) Apologies its 5.5 nm for the cam cover bolts according to the wsm pdf Edited July 29, 2014 by Dnk (see edit history) Link to comment Share on other sites More sharing options...
ripped_fear Posted July 29, 2014 Author Share Posted July 29, 2014 Right thanks guys, need to buy the correct tool to go to the tourque settings now as all of mine just tighten or lossen. thanks for the help may as well have a crack at this myself Link to comment Share on other sites More sharing options...
Stevo Posted July 29, 2014 Share Posted July 29, 2014 Sometimes a good bet for torque that low is a cyclist's torque wrench Jake - plenty available on ebay. Just bang 5.5 nm into the search Link to comment Share on other sites More sharing options...
Dazzi Posted July 30, 2014 Share Posted July 30, 2014 Cam cover bolts 8.3nm for NA's and 5.4nm for TT's Link to comment Share on other sites More sharing options...
ripped_fear Posted July 30, 2014 Author Share Posted July 30, 2014 Cam cover bolts 8.3nm for NA's and 5.4nm for TT's Your A star mate Link to comment Share on other sites More sharing options...
Timlowthian Posted July 30, 2014 Share Posted July 30, 2014 I changed all Nat's over Jake as she her's was leaking! I'd definitely do it yourself, its not that bad at all just time consuming to strip the intake off the top but you would have to do it anyway to change yours. Link to comment Share on other sites More sharing options...
ripped_fear Posted July 30, 2014 Author Share Posted July 30, 2014 Cheers for the advise tim, Manwithsupra was going to do it for me however with limited time to get it in I really want to try. Cant wait to fit the new shinny intake! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now