Gretie22 Posted June 28, 2014 Share Posted June 28, 2014 Starting my spark plug cover today, that's going to be red. Obviously the writing will just be sprayed over, but once it's dry I'd like the paint the wording black, I'm not sure I could trust myself with a paintbrush though. Has anyone else done the wording a different colour once sprayed and how did you do it? I was thinking maybe a tiny roller (if you can buy those) or is that a stupid idea? Link to comment Share on other sites More sharing options...
wile e coyote Posted June 28, 2014 Share Posted June 28, 2014 What about spray the lettering the colour before the whole cover then either before dong cover mask it off or possible to remove cover colour from lettering via rubbing or sanding Just a thought Link to comment Share on other sites More sharing options...
DaveR Posted June 28, 2014 Share Posted June 28, 2014 I think the only way to guarantee accuracy would be to use a (fine) model brush and a small tin of paint. I think a roller would cause runs and or drips and there'd be no easy way of masking it up. Take your time and I'm sure it'll be fine! Link to comment Share on other sites More sharing options...
Gretie22 Posted June 28, 2014 Author Share Posted June 28, 2014 Hmmm think I may just have to go to a model shop buy the smallest brush they have and try and keep a steady hand Link to comment Share on other sites More sharing options...
clay Posted June 28, 2014 Share Posted June 28, 2014 If you look in my garage. i did mine by rubbing down the letters first. witch tacks it back to black then when painted just cleaned the letters back off. Link to comment Share on other sites More sharing options...
ripped_fear Posted June 28, 2014 Share Posted June 28, 2014 I did mine with a touch up brush, just need some patients Link to comment Share on other sites More sharing options...
TheTurtleshead Posted June 28, 2014 Share Posted June 28, 2014 I did mine with a touch up brush, just need some patients Dr. Ripped_Fear...! Link to comment Share on other sites More sharing options...
Gretie22 Posted June 28, 2014 Author Share Posted June 28, 2014 Well the weather has put doing the spark plug cover on hold, but here's some other bits we've already done Link to comment Share on other sites More sharing options...
marbleapple Posted June 29, 2014 Share Posted June 29, 2014 Love the fuse box cover. How did you do that?! Link to comment Share on other sites More sharing options...
Dim Sum Posted June 30, 2014 Share Posted June 30, 2014 Love the fuse box cover. How did you do that?! Same here, liking the fuse box. Let me guess: sprayed it black (fuse box) the stig minion must either be a stencil or maybe a vinyl ? Link to comment Share on other sites More sharing options...
Gretie22 Posted June 30, 2014 Author Share Posted June 30, 2014 Same here, liking the fuse box. Let me guess: sprayed it black (fuse box) the stig minion must either be a stencil or maybe a vinyl ? Correct, vinyl Link to comment Share on other sites More sharing options...
Guest pwings18 Posted June 30, 2014 Share Posted June 30, 2014 Similar job I ve done for a friend's VR6... Link to comment Share on other sites More sharing options...
Gretie22 Posted June 30, 2014 Author Share Posted June 30, 2014 Decided not to paint the lettering as I didn't want to ruin it, might be brave at a later date. This is my engine bay now those few things are done http://img.tapatalk.com/d/14/07/01/pygama5u.jpg Still got a few bits and bobs to paint, there's scrubbing to do and I'm waiting on my new red hoses also I need to find a battery cover. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now