Josh42 Posted June 25, 2014 Share Posted June 25, 2014 Hi all, My car started life as an NA auto and as such has a now redundant transmission cooler section to the bottom of the rad. As I'll be fitting up a FMIC and space is tight, I wondered, has anybody reused the transmission cooler in the base of the OEM rad to eliminate the PAS cooler hose? If so, was it a difficult task? What was required/involved? Thanks Josh Link to comment Share on other sites More sharing options...
David P Posted June 25, 2014 Share Posted June 25, 2014 That'll do the job, just pipe it in. Link to comment Share on other sites More sharing options...
Littler Posted June 25, 2014 Share Posted June 25, 2014 A few have done it Josh with no issues Link to comment Share on other sites More sharing options...
Josh42 Posted June 25, 2014 Author Share Posted June 25, 2014 excellent:) anyone have any ideas what specific parts are needed to do the conversion? Thanks guys! Link to comment Share on other sites More sharing options...
Chris Wilson Posted June 26, 2014 Share Posted June 26, 2014 Some suitable hose and decent hose clips. Put the cooler in the return line to the reservoir. Link to comment Share on other sites More sharing options...
Tommyd16 Posted June 26, 2014 Share Posted June 26, 2014 10mm id iirc Link to comment Share on other sites More sharing options...
Josh42 Posted June 26, 2014 Author Share Posted June 26, 2014 Thanks everyone:) Link to comment Share on other sites More sharing options...
Josh42 Posted July 4, 2014 Author Share Posted July 4, 2014 Can anyone take a photo for me of how they've done this? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now