Timlowthian Posted September 25, 2012 Share Posted September 25, 2012 Having a few issues if anyone can give me any advise The car will only start with a bit of throttle applied until it is warmed up, if you take your foot off the pedal it will bog down and stall. When the car is warmed up to temperature it is fine and can be turned off and then started again fine. It used to rev high then drop as it warms like it meant to but not any more. Anyone have any ideas what it could be? Link to comment Share on other sites More sharing options...
skippyboyo1 Posted September 25, 2012 Share Posted September 25, 2012 You haven't just washed the engine have you? Or it could be wet? Link to comment Share on other sites More sharing options...
Timlowthian Posted September 25, 2012 Author Share Posted September 25, 2012 No its not be washed it has been happening for months now but just getting time to sort it! I have fitted new plugs, leads, distributor cap and rotor arm but no change. Link to comment Share on other sites More sharing options...
Dnk Posted September 25, 2012 Share Posted September 25, 2012 (edited) Cold start sensor is the first thing i'd change Check the WSM for more info on the forum home page, top left click on the repair manuals button Edited September 25, 2012 by Dnk (see edit history) Link to comment Share on other sites More sharing options...
Timlowthian Posted September 25, 2012 Author Share Posted September 25, 2012 Sorry but what is the WSM? i cant find it? I cant find and reference to a cold start sensor when googling any idea where this is located on the N/A? Link to comment Share on other sites More sharing options...
Al Massey Posted September 25, 2012 Share Posted September 25, 2012 Work shop manuals Link to comment Share on other sites More sharing options...
Dnk Posted September 25, 2012 Share Posted September 25, 2012 Cold start sensor is the first thing i'd change Check the WSM for more info on the forum home page, top left click on the repair manuals button[/QUOTE] Link to comment Share on other sites More sharing options...
Timlowthian Posted September 25, 2012 Author Share Posted September 25, 2012 Found them now, could not see them as was not a paid member! Link to comment Share on other sites More sharing options...
David P Posted September 25, 2012 Share Posted September 25, 2012 Sounds to me to be an ICV problem. Link to comment Share on other sites More sharing options...
Dazzi Posted September 25, 2012 Share Posted September 25, 2012 What's the idle at when cold? Is it low? Link to comment Share on other sites More sharing options...
Timlowthian Posted September 25, 2012 Author Share Posted September 25, 2012 Yes its very low when its cold! Its about 500 Max i'd guess without checking! Link to comment Share on other sites More sharing options...
Dazzi Posted September 26, 2012 Share Posted September 26, 2012 And what's it when warmed up? Have you been fiddling with the throttle cable/idle adjustment at all? Link to comment Share on other sites More sharing options...
Timlowthian Posted September 26, 2012 Author Share Posted September 26, 2012 When warm it it sits just under 1000 fine! No I haven't been fiddling with it yet thought I'd see if anyone had any suggestions on here before I did! Link to comment Share on other sites More sharing options...
Dazzi Posted September 26, 2012 Share Posted September 26, 2012 I'd try the free stuff first! As mentioned check your IACV. When I took mine out for a clean a while back it was filthy. Also, check all the vacuum lines for splits/cracks or even loose ones! Link to comment Share on other sites More sharing options...
Timlowthian Posted September 27, 2012 Author Share Posted September 27, 2012 Ill get out and check the IACV this weekend and give it all a clean along with checking all the lines out! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now