Noz Posted August 2, 2012 Share Posted August 2, 2012 Tried a few things here. No voltage at dimmer switch. Checking through circuit diagrams at the moment, going to log what happens so it's somewhere for me to log what pins are doing what. I found a broken wire on the back of the dash, this was the intercepted wire for the speed converter, wired it up nothing changed. Headlights work, signals work, just the backing LED's have no power and radio doesn't dim when light is switched on either, not sure how radio changes I would assume voltage drop but not sure? Anyway, plug voltages WITH lights on (off was no change) A 1 0 A 2 0 A 3 11v A 4 11v A 5 0 A 6 0 A 7 0 A 8 0 A 9 0 A 10 0 A 11 0 A 12 0 A 13 0 A 14 0 A 15 0 A 16 0 ------------------------------------------ C 1 0 C 2 0 C 3 0 C 4 11v C 5 0 C 6 0 C 7 0 C 8 0 C 9 0 C 10 0 C 11 0 C 12 0 C 13 0 C 14 0 C 15 0 C 16 0 ------------------- What to do from here ????? Link to comment Share on other sites More sharing options...
David P Posted August 2, 2012 Share Posted August 2, 2012 Have you checked the 'Dome' fuse? Link to comment Share on other sites More sharing options...
Noz Posted August 2, 2012 Author Share Posted August 2, 2012 ???????????? Im going to manually put 12v into the light circuit tomorrow and see if I have any luck with that, upg gave me some advice on which wires to test so gonna try that. Racking my brains! Which fuse are you refering to mate? I've checked the fuses on the drivers footwell and under the hood with no luck. The dash itself works and functions with brake lights and indicators working, headlights work just the dash lights that won't trigger. Maybe have to run them off the sidelights maybe I've fluffed a wire by tugging it around, apparently I've been called a bit brutal with my dash de-assembly. Link to comment Share on other sites More sharing options...
dr_jekyll Posted August 2, 2012 Share Posted August 2, 2012 check the multi plug uder the steering wheel. Link to comment Share on other sites More sharing options...
Guest ugp Posted August 4, 2012 Share Posted August 4, 2012 ???????????? Im going to manually put 12v into the light circuit tomorrow and see if I have any luck with that, upg gave me some advice on which wires to test so gonna try that. Racking my brains! Which fuse are you refering to mate? I've checked the fuses on the drivers footwell and under the hood with no luck. The dash itself works and functions with brake lights and indicators working, headlights work just the dash lights that won't trigger. Maybe have to run them off the sidelights maybe I've fluffed a wire by tugging it around, apparently I've been called a bit brutal with my dash de-assembly. Just a little bit? Link to comment Share on other sites More sharing options...
Guest ugp Posted August 4, 2012 Share Posted August 4, 2012 not sure how radio changes I would assume voltage drop but not sure? +12 to the illumination wire Link to comment Share on other sites More sharing options...
Noz Posted August 4, 2012 Author Share Posted August 4, 2012 Ive gotta go out at six mate, I only got out of bed at 4pm had a seriously late night/early morning, i got in as folks were getting up, worth it though I'll give you a bell tomorrow if you like. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now