ripped_fear Posted September 7, 2011 Share Posted September 7, 2011 This week has officially been one of my worst in a while, started off with news of my godfather being taken into hospital, for unkown reasons and im still not fully aware of the problem, apart from he has a build up of fluid in his legs and lungs, but the fluid in his lungs has begun to drain away. THANK GOD! Then the supra decided that it wanted new rear brakes and they where to the point that it would have been dangerous to move the car so had no transport to work. After arranging alternative transport I ordered new ones and fitted them yesterday, and thought that would be the end to the small "shh shh" noise I have had on it since just before suprapod, but no new pads on and the PITA noise is still there, so getting her up on a ramp tommorow to see what I can find. Then today on a drive with my girlfriend I managed to ground the car out, and have managed to scrape and put two cracks in my RMM lip Im livid just want this week to be over! Rant over Link to comment Share on other sites More sharing options...
Josh Posted September 7, 2011 Share Posted September 7, 2011 Nightmare man Hope your Godfather gets well soon. Good luck on sorting the lip! Link to comment Share on other sites More sharing options...
ripped_fear Posted September 7, 2011 Author Share Posted September 7, 2011 Nightmare man Hope your Godfather gets well soon. Good luck on sorting the lip! thanks man, i think he seems to be on the mend! i was going to go up and see him but because of the dam brakes i couldnt get anywhere Link to comment Share on other sites More sharing options...
tkddav3 Posted September 7, 2011 Share Posted September 7, 2011 bad luck mate i hope everything gets better soon! Link to comment Share on other sites More sharing options...
probrox Posted September 7, 2011 Share Posted September 7, 2011 My "shh shh" noise turned out to be a wheel bearing. Link to comment Share on other sites More sharing options...
ripped_fear Posted September 7, 2011 Author Share Posted September 7, 2011 My "shh shh" noise turned out to be a wheel bearing. this is what i thought mine may have been originally but i have since been told otherwise. But not sure, the only way to check a wheel bearing is to check for play the wheel correct? and if it was a bearing would it not get louder when turning to one side. Link to comment Share on other sites More sharing options...
Scott Posted September 7, 2011 Share Posted September 7, 2011 Shh Shh noise could be a slightly sticky caliper, or more likely the dust shield rubbing on part of the brake disc. I had a noise like that for ages and it drove me nuts till I eventually got fed up (I'm lazy so it can take a while) and pulled the wheel off. Quite quickly found out that the shield was just hitting a tiny bit of the disc where a bit of corrosion had formed. Link to comment Share on other sites More sharing options...
gavin.starr Posted September 7, 2011 Share Posted September 7, 2011 Another tel tale sign is a bit of vibration when breaking too. Link to comment Share on other sites More sharing options...
ripped_fear Posted September 7, 2011 Author Share Posted September 7, 2011 Shh Shh noise could be a slightly sticky caliper, or more likely the dust shield rubbing on part of the brake disc. I had a noise like that for ages and it drove me nuts till I eventually got fed up (I'm lazy so it can take a while) and pulled the wheel off. Quite quickly found out that the shield was just hitting a tiny bit of the disc where a bit of corrosion had formed. now im glad you said this as its 100% not the caliper BUT the shield rubbing you talk of is what my mate said who i fiitted the pads with and im going to get a proper look tomorow on the ramps. Thanks for your input I hope thats all it is Link to comment Share on other sites More sharing options...
ripped_fear Posted September 7, 2011 Author Share Posted September 7, 2011 Another tel tale sign is a bit of vibration when breaking too. I did get this when I firstly bought the car over a year ago but it soon stoped after I had put a few 100 miles on it. Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 7, 2011 Share Posted September 7, 2011 Make sure that the disks themselves aren't pitted and flaking, especially on the inside next to the dust shield. Best wishes to your Godfather for a speedy recovery. Link to comment Share on other sites More sharing options...
ripped_fear Posted September 7, 2011 Author Share Posted September 7, 2011 Make sure that the disks themselves aren't pitted and flaking, especially on the inside next to the dust shield. Best wishes to your Godfather for a speedy recovery. thanks mate. And I will be sure to check that Link to comment Share on other sites More sharing options...
Hammer Posted September 7, 2011 Share Posted September 7, 2011 Sorry to hear about your Godfather dude. If you need a hand with the brake problem give me a shout. Link to comment Share on other sites More sharing options...
ripped_fear Posted September 7, 2011 Author Share Posted September 7, 2011 Sorry to hear about your Godfather dude. If you need a hand with the brake problem give me a shout. chears Adam thanks for the offer Link to comment Share on other sites More sharing options...
evinX Posted September 7, 2011 Share Posted September 7, 2011 Wishing your godfather a speedy recovery mate! Now about the supra, its only a machine and can always be fixed, always! so dont let it bother you, yes i know they are lovely cars:D Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now