Terminator Posted April 24, 2010 Share Posted April 24, 2010 Still a few parts left that I need to clear out. Walker Lap-Joint Band Clamps, 4" Stainless steel, two new, one used, great clamps wont crush your pipes. High tensile heat resistant bolts. £12 each new, £10 used. £25 the lot. GTE Crank taken from 67000 mile motor. Still in mains in block. £80 Block 87 OS bore, checked by local engineering shop( Anglia Engines), good for re-hone to take 86.95 pistons. No sensors, with engine mount brackets. £100 ( Will throw in Ali sump one) GTE Oil pump taken from 67000 mile motor. £25 Set 6 + 1 of injector plugs and tails. These are required when fitting injectors that fit PHR, Titan, VWR, WOTM etc fuel. They don't fit stock injectors or injectors for HKS and other Japanese rails. These are good quality with easy quick release by squeezing the two release clips on each plug. They are easier to release than other "quick release EV1" plugs. £16 posted. GTE O2 sensor and plug Used 50000 miles in my car. £15 posted GTE cam pulleys taken off my car. £10 SOLD GTE Oil pump taken from 65000KM motor. £30 SOLD GTE in take runners. £10 SOLD GTE Water pump taken from 65000KM motor. £30 SOLD One MKIV engine mount used. £15 SOLD GTE Oil cooler and filter mount £10 SOLD JDM TT Auto gear box speed sender. £12 SOLD OEM(not fibreglass) spats, need repair (199 Silver) £40. SOLD New Aluminium mesh 1000mm *300mm. £20 SOLD Sony Amp, Working, taken from my car a few months ago. £12 SOLD Link to comment Share on other sites More sharing options...
barneybrendan Posted April 24, 2010 Share Posted April 24, 2010 what sort of repair needed on the spats.if its not too bad ill take them Link to comment Share on other sites More sharing options...
RobUK Posted April 24, 2010 Share Posted April 24, 2010 Can I take the Mesh.... and are the sound dampening matts like dynamat.... if so then I am pretty sure i'll take all of it.. Link to comment Share on other sites More sharing options...
hadyn Posted April 24, 2010 Share Posted April 24, 2010 How much for the amp with postage? Link to comment Share on other sites More sharing options...
RobD Posted April 24, 2010 Share Posted April 24, 2010 How much for the spats posted if there not gone already 2nd dibbs after barney Link to comment Share on other sites More sharing options...
Scott Posted April 24, 2010 Share Posted April 24, 2010 Will take the sound deadening if its not gone and you can post. Link to comment Share on other sites More sharing options...
dude Posted April 25, 2010 Share Posted April 25, 2010 Phil we (AFR) will take the block and crank, let me know your Paypal and I'll get Matt to do transfer asap, cheers dude. Link to comment Share on other sites More sharing options...
steve spedd Posted April 25, 2010 Share Posted April 25, 2010 will take the amp if still available? Link to comment Share on other sites More sharing options...
Terminator Posted April 25, 2010 Author Share Posted April 25, 2010 what sort of repair needed on the spats.if its not too bad ill take them The OS has the pointed bit that wraps into the bumper that needs smoothing and light filling, it has taken an impact to the leading edge about level with the wheel centre, has two cracks 40mm - 50mm long. I bit of gentle heat and then fine filler should sort it out. I had worse repaired and put on my car. The NS has scratches, might even be OK with a bit of G3 and a polish. Let me know asap. Thanks Link to comment Share on other sites More sharing options...
Terminator Posted April 25, 2010 Author Share Posted April 25, 2010 Phil we (AFR) will take the block and crank, let me know your Paypal and I'll get Matt to do transfer asap, cheers dude. Hi John, Its yours. I cant be arsed with taking the pump off . I'll need to sort out a pallet. I might have a sump I can stick back on to protect the BE. Thanks Link to comment Share on other sites More sharing options...
Terminator Posted April 25, 2010 Author Share Posted April 25, 2010 Can I take the Mesh.... and are the sound dampening matts like dynamat.... if so then I am pretty sure i'll take all of it.. Never used dynamat so can't say. From my technical point of view it is: Sticky, flexible, and black;) and the boxes are heavy so it is quite dense. Sorry not much help, I guess if it was good enough for Aston, it can be too bad. Not worth sound deadening my car now:D, hence sale. For what it is it's a steal. Let me know ASAP as others want it as described. Link to comment Share on other sites More sharing options...
Terminator Posted April 25, 2010 Author Share Posted April 25, 2010 How much for the amp with postage? £12 posted. pm for paypal thanks Link to comment Share on other sites More sharing options...
RobUK Posted April 25, 2010 Share Posted April 25, 2010 Yeah ill take all of it and the mesh then Link to comment Share on other sites More sharing options...
barneybrendan Posted April 25, 2010 Share Posted April 25, 2010 pm sent Link to comment Share on other sites More sharing options...
Terminator Posted April 25, 2010 Author Share Posted April 25, 2010 More parts and pics added Link to comment Share on other sites More sharing options...
Nicolai Posted April 25, 2010 Share Posted April 25, 2010 Is the first oil pump still available? If so can you give me a price with shipping to Holland? Thanks Link to comment Share on other sites More sharing options...
Terminator Posted April 25, 2010 Author Share Posted April 25, 2010 More parts added Link to comment Share on other sites More sharing options...
Terminator Posted October 31, 2010 Author Share Posted October 31, 2010 A few parts still left. Link to comment Share on other sites More sharing options...
bignum Posted October 31, 2010 Share Posted October 31, 2010 Hi, do you still have the injector plugs? Link to comment Share on other sites More sharing options...
Terminator Posted November 1, 2010 Author Share Posted November 1, 2010 Hi, do you still have the injector plugs? Yes still available. Link to comment Share on other sites More sharing options...
Recommended Posts